Hatem Mrad - Staff Member Profile

Hatem Mrad, Ph. D.

Campus de Rouyn-Noranda

Room :: D-532
Phone :: 819 762-0971 ext 2106
Toll-free :: +1 877 870-8728 ext 2106

Email :: hatem.mrad@uqat.ca

Education

Philosophiae Doctor génie mécanique, Université de Technologie de Compiègne, France ET Université du Québec à Chicoutimi, Canada (2008)
Maîtrise en mécanique des structures, Université de technologie de Compiègne, France (2003)
Baccalauréat en génie électromécanique, École Nationale d'Ingénieurs de Sfax, Tunisie (2001)

Areas of expertise

Modélisation et simulation fiabiliste des systèmes mécaniques
Connectivité des procédés et analyse intelligente des données
Programmation structurée et outils numériques
Optimisation des procédés industriels
Automatisation et contrôle

Publications

Source: ORCID(opens in a new tab)

2025

Crack Propagation in Axial-Flow Fan Blades Under Complex Loading Conditions: A FRANC3D and ABAQUS Co-Simulation Approach
Journal article
Applied Sciences
DOI: 10.3390/app15031597(opens in a new tab)

2024

Aerodynamic shape optimization of NACA airfoils based on a novel unconstrained conjugate gradient algorithm
Journal article
Journal of Engineering Research (Kuwait)
DOI: 10.1016/j.jer.2024.07.020(opens in a new tab)
Crack Propagation in Axial-Flow Fan Blades Under Complex Loading Conditions: A Franc3d and Abaqus Co-Simulation Approach
Other
SSRN
DOI: 10.2139/ssrn.4973909(opens in a new tab)
Defect detection in additive manufacturing using image processing techniques
Conference paper
Procedia Computer Science
DOI: 10.1016/j.procs.2024.02.035(opens in a new tab)
Exploring the Effect of Sub-zero Treatment on the Performance of Steel Grades
Conference paper
Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-3-031-65007-9_6(opens in a new tab)
Failure prediction in the refinery piping system using machine learning algorithms: classification and comparison
Conference paper
Procedia Computer Science
DOI: 10.1016/j.procs.2024.01.164(opens in a new tab)
Fatigue Life Analysis and Topological Optimization of a High-Pressure Centrifugal Pump
Conference paper
Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-3-031-70428-4_11(opens in a new tab)
Modeling of Effect of Infill Density Percentage on Rotating Bending Fatigue Behavior of Additive-Manufactured PLA Polymers
Journal article
Materials
DOI: 10.3390/ma17020471(opens in a new tab)
Numerical Investigation on the Performance of a Prototyped Tidal Turbine
Conference paper
Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-3-031-67152-4_20(opens in a new tab)
Optimization of an axial-flow mine ventilation fan based on effects of design parameters
Journal article
Results in Engineering
DOI: 10.1016/j.rineng.2023.101662(opens in a new tab)
Optimization of unconstrained problems using a developed algorithm of spectral conjugate gradient method calculation
Journal article
Mathematics and Computers in Simulation
DOI: 10.1016/j.matcom.2023.07.026(opens in a new tab)
Process Optimization and Distortion Prediction in Directed Energy Deposition
Journal article
Journal of Manufacturing and Materials Processing
DOI: 10.3390/jmmp8030116(opens in a new tab)

2023

A techno-economic assessment and optimization of Dumat Al-Jandal wind farm in Kingdom of Saudi Arabia
Journal article
Energy Science and Engineering
DOI: 10.1002/ese3.1602(opens in a new tab)
An Assessment of the Ultimate Pressure of Multistage Centrifugal Pumps
Conference paper
Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-3-031-14615-2_40(opens in a new tab)
Anomaly Detection in Ultrasonic Monitoring System Using Unsupervised Machine Learning
Book chapter
Applied Condition Monitoring
DOI: 10.1007/978-3-031-34190-8_34(opens in a new tab)
Defect Detection in Additive Manufacturing Using Computer Vision Monitoring
Conference paper
Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-3-031-14615-2_33(opens in a new tab)
Experimental and numerical investigation on high-pressure centrifugal pumps: Ultimate pressure formulation, fatigue life assessment and topological optimization of discharge section
Journal article
CMES - Computer Modeling in Engineering and Sciences
DOI: 10.32604/cmes.2023.030777(opens in a new tab)
Non-destructive Identification of Damage Mechanisms in Unidirectional Composites by Acoustic Emission and Machine Learning-Based Clustering
Book chapter
Applied Condition Monitoring
DOI: 10.1007/978-3-031-34190-8_8(opens in a new tab)
Numerical and Experimental Study of the Lubricant Oil Leak Phenomenon on a Metro Traction Motor Gear Box
Book chapter
Applied Condition Monitoring
DOI: 10.1007/978-3-031-34190-8_32(opens in a new tab)
On the Improvement of the Performance of an Axial Mining Fan: Parametric Study
Conference paper
Lecture Notes in Mechanical Engineering
DOI: 10.1007/978-3-031-14615-2_39(opens in a new tab)
Optimizing the operation safety and performance of an axial compressor using fluid-structure coupling and high-performance computing
Journal article
Results in Engineering
DOI: 10.1016/j.rineng.2023.101061(opens in a new tab)

2022

Energy Prediction and Energy Management in Kinetic Energy-Harvesting Wireless Sensors Network for Industry 4.0
Journal article
Applied Sciences (Switzerland)
DOI: 10.3390/app12147298(opens in a new tab)
Thermal Dependency Assessment of Silicon Wafer Behaviour Oriented at Different Angles
Journal article
Arabian Journal for Science and Engineering
DOI: 10.1007/s13369-021-06239-6(opens in a new tab)

2021

Effects of chromic treatment on the surface properties of polypropylene (Pp) wood composites
Journal article
Coatings
DOI: 10.3390/coatings11070851(opens in a new tab)
Effects of coating on the dimensional stability of wood-polymer composites
Journal article
Coatings
DOI: 10.3390/coatings11060711(opens in a new tab)
Rebuttal letter
Journal article
Measurement: Journal of the International Measurement Confederation
DOI: 10.1016/j.measurement.2020.108401(opens in a new tab)

2020

Implementation of a reliability test protocol for a multimeasurement sensor dedicated to industrial applications of the Internet of things
Journal article
Measurement: Journal of the International Measurement Confederation
DOI: 10.1016/j.measurement.2019.107312(opens in a new tab)
Investigation of the effect of solidification rate on microstructure of Al-0.13Si-0.3Fe DC-cast alloy using EBSD and DSC techniques
Journal article
International Journal of Materials Research
DOI: 10.3139/146.111960(opens in a new tab)
Viscoelastic characterization of high-density polyethylene membranes under the combined effect of the temperature and the gravity for thermoforming applications
Journal article
Polymer Engineering and Science
DOI: 10.1002/pen.25513(opens in a new tab)

2019

Thermomechanical Study and Fracture Properties of Silicon Wafer under Effect of Crystal Orientation
Conference paper
IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899X/521/1/012004(opens in a new tab)

2018

Numerical and experimental assessment of water absorption of wood-polymer composites
Journal article
Measurement: Journal of the International Measurement Confederation
DOI: 10.1016/j.measurement.2017.10.011(opens in a new tab)

2016

Materials performance and design analysis of suspension lower-arm fabricated from Al-Si-Mg castings
Conference paper
Key Engineering Materials
DOI: 10.4028/www.scientific.net/KEM.710.315(opens in a new tab)
On the characteristics of automotive low arm-suspension system parts made of aluminum casting alloys
Journal article
International Journal of Cast Metals Research
DOI: 10.1080/13640461.2015.1106782(opens in a new tab)

2015

Numerical investigation of aerodynamic performance of darrieus wind turbine based on the magnus effect
Journal article
International Journal of Multiphysics
DOI: 10.1260/1750-9548.9.4.383(opens in a new tab)

2013

A reliability study of springback on the sheet metal forming process under probabilistic variation of prestrain and blank holder force
Journal article
Acta Mechanica Sinica/Lixue Xuebao
DOI: 10.1007/s10409-013-0036-z(opens in a new tab)

2012

Finite element analysis of elastoplastic modeling: Application to one-dimensional loading of as-received and pre-strained materials
Journal article
Acta Mechanica
DOI: 10.1007/s00707-011-0606-8(opens in a new tab)

Positions

Professeur titulaire

Titulaire

Responsable

Workplace

Locations

Education

Areas of expertise

Publications

Crack Propagation in Axial-Flow Fan Blades Under Complex Loading Conditions: A FRANC3D and ABAQUS Co-Simulation Approach

Aerodynamic shape optimization of NACA airfoils based on a novel unconstrained conjugate gradient algorithm

Crack Propagation in Axial-Flow Fan Blades Under Complex Loading Conditions: A Franc3d and Abaqus Co-Simulation Approach

Defect detection in additive manufacturing using image processing techniques

Exploring the Effect of Sub-zero Treatment on the Performance of Steel Grades

Failure prediction in the refinery piping system using machine learning algorithms: classification and comparison

Fatigue Life Analysis and Topological Optimization of a High-Pressure Centrifugal Pump

Modeling of Effect of Infill Density Percentage on Rotating Bending Fatigue Behavior of Additive-Manufactured PLA Polymers

Numerical Investigation on the Performance of a Prototyped Tidal Turbine

Optimization of an axial-flow mine ventilation fan based on effects of design parameters

Optimization of unconstrained problems using a developed algorithm of spectral conjugate gradient method calculation

Process Optimization and Distortion Prediction in Directed Energy Deposition

A techno-economic assessment and optimization of Dumat Al-Jandal wind farm in Kingdom of Saudi Arabia

An Assessment of the Ultimate Pressure of Multistage Centrifugal Pumps

Anomaly Detection in Ultrasonic Monitoring System Using Unsupervised Machine Learning

Defect Detection in Additive Manufacturing Using Computer Vision Monitoring

Experimental and numerical investigation on high-pressure centrifugal pumps: Ultimate pressure formulation, fatigue life assessment and topological optimization of discharge section

Non-destructive Identification of Damage Mechanisms in Unidirectional Composites by Acoustic Emission and Machine Learning-Based Clustering

Numerical and Experimental Study of the Lubricant Oil Leak Phenomenon on a Metro Traction Motor Gear Box

On the Improvement of the Performance of an Axial Mining Fan: Parametric Study

Optimizing the operation safety and performance of an axial compressor using fluid-structure coupling and high-performance computing

Energy Prediction and Energy Management in Kinetic Energy-Harvesting Wireless Sensors Network for Industry 4.0

Thermal Dependency Assessment of Silicon Wafer Behaviour Oriented at Different Angles

Effects of chromic treatment on the surface properties of polypropylene (Pp) wood composites

Effects of coating on the dimensional stability of wood-polymer composites

Rebuttal letter

Implementation of a reliability test protocol for a multimeasurement sensor dedicated to industrial applications of the Internet of things

Investigation of the effect of solidification rate on microstructure of Al-0.13Si-0.3Fe DC-cast alloy using EBSD and DSC techniques

Viscoelastic characterization of high-density polyethylene membranes under the combined effect of the temperature and the gravity for thermoforming applications

Thermomechanical Study and Fracture Properties of Silicon Wafer under Effect of Crystal Orientation

Numerical and experimental assessment of water absorption of wood-polymer composites

Materials performance and design analysis of suspension lower-arm fabricated from Al-Si-Mg castings

On the characteristics of automotive low arm-suspension system parts made of aluminum casting alloys

Numerical investigation of aerodynamic performance of darrieus wind turbine based on the magnus effect

A reliability study of springback on the sheet metal forming process under probabilistic variation of prestrain and blank holder force

Finite element analysis of elastoplastic modeling: Application to one-dimensional loading of as-received and pre-strained materials