Ahmed Koubaa - Staff Member Profile

Ahmed Koubaa - Staff Member Profile

Ahmed Koubaa, Ph. D.

Positions

Responsable principal

Workplace

Locations

Room :
F-209
Phone :
819 762-0971 ext 2579
Toll-free :
+1 877 870-8728 ext 2579
Email :
ahmed.koubaa@uqat.ca

Areas of expertise

  • Caractérisation de la qualité du bois des essences à croissance rapide
  • Valorisation du bois des essences à croissance rapide pour des applications à haute valeur ajoutée
  • Étude des variations génétiques et phénotypiques en fonction des traitements sylvicoles des propriétés de la fibre et du bois
  • Développement de nouvelles technologies de production de biomatériaux à base de bois et des polymères

Publications

Source: ORCID

2026

  • Biomass Hydrogel for Wound Dressings: Design, Functionalization and Application

    Journal article

    Small

    DOI: 10.1002/smll.74130

  • Biochemical Methane Yield and Process Performance in Thermophilic Anaerobic Digestion of Abandoned Organic Solid Wastes

    Journal article

    Energies

    DOI: 10.3390/en19040921
2025

  • Enhancing Fire Resistance and Mechanical Properties of Wood Strand Boards by Impregnation with Sodium Bicarbonate and Sodium Borate

    Journal article

    Polymers

    DOI: 10.3390/polym17212943

  • Development and Characterization of Scented PLA-Based Biocomposites Reinforced with Spent Coffee Grounds and Lignin for FDM 3D Printing

    Journal article

    Polymers

    DOI: 10.3390/polym17212836

  • Effect of Printing Temperature on the Microstructure and Tensile Properties of Polylactic Acid–Magnetic Iron Composites Manufactured by Material Extrusion

    Journal article

    Polymers

    DOI: 10.3390/polym17182485

  • Upcycling Spent Coffee Grounds-Based Composite for 3D Printing: A Review of Current Research

    Journal article

    Journal of Composites Science

    DOI: 10.3390/jcs9090467

  • Impact of Fiber Morphology and Content on the Thermal Stability, and Mechanical Performance of Maple Wood Fiber‐Polypropylene Composites

    Journal article

    Journal of Applied Polymer Science

    DOI: 10.1002/app.57211

  • Performance of Oriented Strand Boards Made with Jack Pine Strands Produced by an Innovative Strander-Canter

    Journal article

    Forests

    DOI: 10.3390/f16081227

  • Innovative Valorization of Wood Panel Waste into Activated Biochar for Efficient Phenol Adsorption

    Journal article

    Applied Sciences

    DOI: 10.3390/app15158518

  • Performance of Oriented Strand Boards Made with Jack Pine Strands Produced by an Innovative Strander-Canter

    Preprint
    DOI: 10.20944/preprints202506.2322.v1

  • 3D‐printing continuous plant fiber/polylactic acid composites with lightweight and high strength

    Journal article

    Polymer Composites

    DOI: 10.1002/pc.29178

  • Metallic contaminants in wood panel production process: Evaluating press plate damage and detecting potential using IR thermography and spectroscopy

    Journal article

    International Journal of Damage Mechanics

    DOI: 10.1177/10567895241297301

  • A Review of Operational Conditions of the Agroforestry Residues Biomethanization for Bioenergy Production Through Solid-State Anaerobic Digestion (SS-AD)

    Journal article

    Energies

    DOI: 10.3390/en18061397

  • Variations in ring width density and tracheid morphology of tamarack wood (Larix laricina)

    Journal article

    Canadian Journal of Forest Research

    DOI: 10.1139/cjfr-2024-0288

  • Suitability of 3D-Printed Cellulose-Based Polymer Materials for Electrical Insulation Applications

    Book chapter
    DOI: 10.1007/978-3-031-79110-9_16
2024

  • Evaluating the properties of deinking paper sludge from the Mediterranean area for recycling in local areas as a soil amendment and to enhance growth substrates

    Journal article

    Euro-Mediterranean Journal for Environmental Integration

    DOI: 10.1007/s41207-024-00510-6

  • Effect of Wood Species on Lignin-Retaining High-Transmittance Transparent Wood Biocomposites

    Journal article

    Polymers

    DOI: 10.3390/polym16172493

  • Sustainability, Circularity, and Innovation in Wood-based Panel Manufacturing in the 2020s: Opportunities and Challenges

    Journal article

    Current Forestry Reports

    DOI: 10.1007/s40725-024-00229-1

  • Recent Advances in Bio-Based Adhesives and Formaldehyde-Free Technologies for Wood-Based Panel Manufacturing

    Journal article

    Current Forestry Reports

    DOI: 10.1007/s40725-024-00227-3

  • Optimizing the Dielectric and Mechanical Performance of 3D-Printed Cellulose-Based Biocomposites and Bionanocomposites through Factorial Design for Electrical Insulation Application

    Journal article

    Polymers

    DOI: 10.3390/polym16152117

  • Characterization of Posidonia oceanica Fibers High-Density Polyethylene Composites: Reinforcing Potential and Effect of Coupling Agent

    Journal article

    Journal of Composites Science

    DOI: 10.3390/jcs8070236

  • Investigation of Thermomechanical and Dielectric Properties of PLA-CA 3D-Printed Biobased Materials

    Journal article

    Journal of Composites Science

    DOI: 10.3390/jcs8060197

  • Visible Light-Induced Photocatalytic Degradation of Methylene Blue Using Copper-Doped Carbon Dots One-Step Derived from CCA-Wood

    Journal article

    Forests

    DOI: 10.3390/f15040680

  • A paradigm shift towards production of sustainable bioenergy and advanced products from <i>Cannabis</i>/hemp biomass in Canada

    Journal article

    Biomass Conversion and Biorefinery

    DOI: 10.1007/S13399-022-02570-6
2023

  • How Do 3D Printing Parameters Affect the Dielectric and Mechanical Performance of Polylactic Acid–Cellulose Acetate Polymer Blends?

    Journal article

    Journal of Composites Science

    DOI: 10.3390/jcs7120492

  • The Role Played by the Rake Angle of a Strander-Canter When Processing Jack Pine Logs

    Journal article

    Forests

    DOI: 10.3390/f14112182

  • A Comparative Study on Heavy Metal Removal from CCA-Treated Wood Waste by Yarrowia lipolytica: Effects of Metal Stress

    Journal article

    Journal of Fungi

    DOI: 10.3390/jof9040469

  • Chemical Elements Content and Distributions within Different Tissue Types of White Spruce

    Journal article

    Energies

    DOI: 10.3390/en16073257

  • Analysis of the interaction between internal porosity and oriented strand board performance using X-ray computed tomography

    Journal article

    European Journal of Wood and Wood Products

    DOI: 10.1007/s00107-022-01884-6

  • Activities of cellulose acetate and microcrystalline cellulose on the thermal and morphomechanical performances of a biobased hybrid composite made polybutylene succinate

    Journal article

    International Journal of Biological Macromolecules

    DOI: 10.1016/J.IJBIOMAC.2023.126918

  • Advances in Modified Wood-Based Adsorbents for Contaminant Removal: Valorization Methods, Modification Mechanisms, and Environmental Applications

    Journal article

    Current Forestry Reports

    DOI: 10.1007/S40725-023-00200-6

  • Dielectric and rheological performances of cellulose acetate, polylactic acid and polyhydroxybutyrate-co-valerate biobased blends

    Journal article

    Polymer

    DOI: 10.1016/J.POLYMER.2023.126358

  • Effects of Wood Species on the Energy Requirements and Size Distribution of Strands Produced by a Strander- Canter

    Journal article

    BioResources

    DOI: 10.15376/BIORES.18.3.5873-5886
2022

  • Copper-Doped Carbon Nanodots with Superior Photocatalysis, Directly Obtained from Chromium-Copper-Arsenic-Treated Wood Waste

    Journal article

    Polymers

    DOI: 10.3390/polym15010136

  • Regional, Site, and Tree Variations of Wood Density and Growth in Thuja occidentalis L. in the Quebec Forest

    Journal article

    Forests

    DOI: 10.3390/f13121984

  • Influence of Four Spacings between Trees and Four Samplings Heights on Selected Wood Quality Attributes of White Spruce (Picea glauca (Moench) Voss)

    Journal article

    Forests

    DOI: 10.3390/f13111807

  • Fire Behavior and Failure Model of Multilayered Wood Flour/HDPE/Polycarbonate Composites with a Sandwich Structure

    Journal article

    Polymers

    DOI: 10.3390/polym14142833

  • Pyrolysis of Chromated Copper Arsenate-Treated Wood: Investigation of Temperature, Granulometry, Biochar Yield, and Metal Pathways

    Journal article

    Energies

    DOI: 10.3390/en15145071

  • Synthesis and Characterization of Wood Rigid Polyurethane Composites

    Journal article

    Materials

    DOI: 10.3390/ma15124316

  • Physical and Mechanical Properties of Oriented Strand Board Made from Eastern Canadian Softwood Species

    Journal article

    Forests

    DOI: 10.3390/f13040523

  • Comparison between static modulus of elasticity, non-destructive testing moduli of elasticity and stress-wave speed in white spruce and lodgepole pine wood

    Journal article

    Wood Material Science and Engineering

    DOI: 10.1080/17480272.2021.1871949

  • Effects of Strands Geometry on the Physical and Mechanical Properties of Oriented Strand Boards (OSBs) Made from Black Spruce and Trembling Aspen

    Journal article

    BioResources

    DOI: 10.15376/BIORES.17.3.3929-3943

  • The emerging development of transparent wood: materials, characteristics, and applications

    Journal article

    Current Forestry Reports

    DOI: 10.1007/S40725-022-00172-Z

  • Towards Strand Production in Primary Log Breakdown: Effects of the Counter-Knife and Temperature on Size Distribution of Jack Pine Strands

    Journal article

    BioResources

    DOI: 10.15376/BIORES.17.2.2632-2651
2021

  • Variation of White Spruce Carbon Content with Age, Height, Social Classes and Silvicultural Management

    Journal article

    Energies

    DOI: 10.3390/en14238015

  • Xerogel-like Materials from Sustainable Sources: Properties and Electrochemical Performances

    Journal article

    Energies

    DOI: 10.3390/en14237977

  • Dielectric properties and thermal stability of cellulose high-density polyethylene bio-based composites

    Journal article

    Industrial Crops and Products

    DOI: 10.1016/j.indcrop.2021.113928

  • Effect of Pyrolysis Temperature and Wood Species on the Properties of Biochar Pellets

    Journal article

    Energies

    DOI: 10.3390/en14206529

  • Flammability, thermal stability, and mechanical properties of wood flour/polycarbonate/polyethylene bio-based composites

    Journal article

    Industrial Crops and Products

    DOI: 10.1016/j.indcrop.2021.113638

  • Effects of Chromic Treatment on the Surface Properties of Polypropylene (PP) Wood Composites

    Journal article

    Coatings

    DOI: 10.3390/coatings11070851

  • Mitigation of CO2, CH4 and N2O from Acidic Clayey Soil Amended with Fertilizer Pellets Based on Alkaline Organic Residues

    Journal article

    Waste and Biomass Valorization

    DOI: 10.1007/s12649-020-01276-y

  • Fire Retardancy, Water Absorption, and Viscoelasticity of Borated Wood—Polycarbonate Biocomposites

    Journal article

    Polymers

    DOI: 10.3390/polym13142234

  • Effects of Coating on the Dimensional Stability of Wood-Polymer Composites

    Journal article

    Coatings

    DOI: 10.3390/coatings11060711

  • Dielectric Properties of Wood-Polymer Composites: Effects of Frequency, Fiber Nature, Proportion, and Chemical Composition

    Journal article

    Journal of Composites Science

    DOI: 10.3390/jcs5060141

  • Short-Term Effects of Biosolid Application on Two Mediterranean Agricultural Soils and Durum Wheat Yield

    Journal article

    Agronomy

    DOI: 10.3390/agronomy11040709

  • Investigation of sustainable porous carbon as radar absorbing material

    Journal article

    Matéria (Rio de Janeiro)

    DOI: 10.1590/s1517-707620210002.1263
2020

  • CO2 Emission and Change in the Fertility Parameters of a Calcareous Soil Following Annual Applications of Deinking Paper Sludge (The Case of Tunisia)

    Journal article

    Agronomy

    DOI: 10.3390/agronomy10070956

  • Effect of the Pyro-Gasification Temperature of Wood on the Physical and Mechanical Properties of Biochar-Polymer Biocomposites

    Journal article

    Materials

    DOI: 10.3390/ma13061327

  • 3D finite element enthalpy method for analysis of phytosanitary treatment of wood by microwave

    Journal article

    European Journal of Wood and Wood Products

    DOI: 10.1007/S00107-020-01534-9

  • Conversion of lignocellulose into biochar and furfural through boron complexation and esterification reactions

    Journal article

    Bioresource Technology

    DOI: 10.1016/J.BIORTECH.2020.123586

  • Dielectric characterization of white birch-activated biochar composites: A sustainable alternative to radar-absorbing materials

    Journal article

    Journal of Composite Materials

    DOI: 10.1177/0021998319877493

  • Efficiency of eight modified materials for As(V) removal from synthetic and real mine effluents

    Journal article

    Minerals Engineering

    DOI: 10.1016/J.MINENG.2020.106310

  • High-performance lignocellulose/polycarbonate biocomposites fabricated by in situ reaction: Structure and properties

    Journal article

    Composites Part A: Applied Science and Manufacturing

    DOI: 10.1016/J.COMPOSITESA.2020.106068

  • Improving lignocellulose thermal stability by chemical modification with boric acid for incorporating into polyamide

    Journal article

    Materials & Design

    DOI: 10.1016/J.MATDES.2020.108589

  • Microbial remediation for the removal of inorganic contaminants from treated wood: Recent trends and challenges

    Journal article

    Chemosphere

    DOI: 10.1016/J.CHEMOSPHERE.2020.127429

  • Production of Bio-based Polyol from Oxypropylated Pyrolytic Lignin for Rigid Polyurethane Foam Application

    Journal article

    Waste and Biomass Valorization

    DOI: 10.1007/S12649-019-00876-7

  • The conversion of wood residues, using pilot-scale technologies, into porous activated biochars for supercapacitors

    Journal article

    Journal of Porous Materials

    DOI: 10.1007/S10934-019-00823-W
2019

  • Reinforcement of continuous fibers for extruded wood-flour/HDPE composites: Effects of fiber type and amount

    Journal article

    Construction and Building Materials

    DOI: 10.1016/j.conbuildmat.2019.116718

  • Effect of Forest Biomass Pretreatment on Essential Oil Yield and Properties

    Journal article

    Forests

    DOI: 10.3390/f10111042

  • Influence of Stem Taper on the Yield of Black Spruce Stands and Trees Following Commercial Thinning

    Journal article

    Forests

    DOI: 10.3390/f10111024

  • Effect of Seed Transfer on Selected Wood Quality Attributes of Jack Pine (Pinus banksiana Lamb.)

    Journal article

    Forests

    DOI: 10.3390/f10110985

  • Deinking sludge compost stability and maturity assessment using Fourier transform infrared spectroscopy and thermal analysis

    Journal article

    Waste Management & Research: The Journal for a Sustainable Circular Economy

    DOI: 10.1177/0734242X19864638

  • Enhanced SO2 adsorption and desorption on chemically and physically activated biochar made from wood residues

    Journal article

    Industrial Crops and Products

    DOI: 10.1016/j.indcrop.2019.06.019

  • Phenotypic Correlations among Growth and Selected Wood Properties in White Spruce (Picea glauca (Moench) Voss) †

    Journal article

    Forests

    DOI: 10.3390/f10070589

  • Intra-Ring Wood Density and Dynamic Modulus of Elasticity Profiles for Black Spruce and Jack Pine from X-Ray Densitometry and Ultrasonic Wave Velocity Measurement

    Journal article

    Forests

    DOI: 10.3390/f10070569

  • Effect of fiber and polymer variability on the rheological properties of wood polymer composites during processing

    Journal article

    Polymer Composites

    DOI: 10.1002/pc.24909

  • Influence of Pyro-Gasification and Activation Conditions on the Porosity of Activated Biochars: A Literature Review

    Journal article

    Waste and Biomass Valorization

    DOI: 10.1007/s12649-019-00797-5

  • Intra-ring variations and interrelationships for selected wood anatomical and physical properties of Thuja occidentalis L

    Journal article

    Forests

    DOI: 10.3390/f10040339

  • Performance of Physically and Chemically Activated Biochars in Copper Removal from Contaminated Mine Effluents

    Journal article

    Water, Air, and Soil Pollution

    DOI: 10.1007/s11270-019-4233-7

  • Use of wood residues for the production of highly porous materials for environmental application and energy storage

    Journal article

    Abstracts of Papers of the American Chemical Society

    See publication
2018

  • The influence of pilot-scale pyro-gasification and activation conditions on porosity development in activated biochars

    Journal article

    Biomass and Bioenergy

    DOI: 10.1016/j.biombioe.2018.08.016

  • Synergetic effect of Posidonia oceanica fibres and deinking paper sludge on the thermo-mechanical properties of high density polyethylene composites

    Journal article

    Industrial Crops and Products

    DOI: 10.1016/j.indcrop.2018.04.075

  • Rheological behavior of high‐density polyethylene (HDPE) filled with paper mill sludge

    Journal article

    Journal of Applied Polymer Science

    DOI: 10.1002/app.46484

  • Activated Biochar as an Effective Sorbent for Organic and Inorganic Contaminants in Water

    Journal article

    Water, Air, and Soil Pollution

    DOI: 10.1007/s11270-018-3889-8

  • Effects of commercial thinning, log position in the stem, and cutting width on the surface quality of cants produced by a chipper-canter

    Journal article

    Wood Material Science and Engineering

    DOI: 10.1080/17480272.2016.1232308

  • Microwave drying kinetics of jack pine wood: determination of phytosanitary efficacy, energy consumption, and mechanical properties

    Journal article

    European Journal of Wood and Wood Products

    DOI: 10.1007/s00107-018-1316-x

  • Numerical and experimental assessment of water absorption of wood-polymer composites

    Journal article

    Measurement: Journal of the International Measurement Confederation

    DOI: 10.1016/j.measurement.2017.10.011

  • Phenotypic and genotypic correlations for wood properties of hybrid poplar clones of Southern Quebec

    Journal article

    Forests

    DOI: 10.3390/f9030140

  • Production, characterization, and potential of activated biochar as adsorbent for phenolic compounds from leachates in a lumber industry site

    Journal article

    Environmental Science and Pollution Research

    DOI: 10.1007/s11356-018-2712-9

  • Tensile properties, thermal conductivity, and thermal stability of short carbon fiber reinforced polypropylene composites

    Journal article

    Polymer Composites

    DOI: 10.1002/pc.24093
2017

  • Effect of High Content of Deinking Paper Sludge (DPS) on the Reinforcement of HDPE

    Journal article

    Journal of Polymers and the Environment

    DOI: 10.1007/s10924-016-0837-9

  • Effects of log position in the stem and commercial thinning on jack pine chip dimensions produced by a chipper-canter

    Journal article

    European Journal of Wood and Wood Products

    DOI: 10.1007/s00107-016-1062-x

  • Influence of polymer powder on properties of cemented paste backfill

    Journal article

    International Journal of Mineral Processing

    DOI: 10.1016/j.minpro.2017.07.013

  • Morphological, mechanical, and physical properties of composites made with wood flour-reinforced polypropylene/recycled poly(ethylene terephthalate) blends

    Journal article

    Polymer Composites

    DOI: 10.1002/pc.23745

  • Robust DEA to assess the reliability of methyl methacrylate-hardened hybrid poplar wood

    Journal article

    Annals of Operations Research

    DOI: 10.1007/s10479-016-2201-9
2016

  • Chemical composition and surface properties of paper mill sludge and their impact on high density polyethylene (HDPE) composites

    Journal article

    Journal of Wood Chemistry and Technology

    DOI: 10.1080/02773813.2015.1057647

  • EFFECTS OF LOG POSITION IN THE STEM AND CUTTING WIDTH ON SIZE DISTRIBUTION OF BLACK SPRUCE CHIPS PRODUCED BY A CHIPPER-CANTER

    Journal article

    Wood and Fiber Science

    See publication

  • Effects of log position in the stem and cutting width on size distribution of black spruce chips produced by a chipper-canter

    Journal article

    Wood and Fiber Science

    See publication

  • Experimental investigation into the compressive strength development of cemented paste backfill containing Nano-silica

    Journal article

    Cement and Concrete Composites

    DOI: 10.1016/j.cemconcomp.2016.06.016

  • Experimental investigation of mechanical and microstructural properties of cemented paste backfill containing maple-wood filler

    Journal article

    Construction and Building Materials

    DOI: 10.1016/j.conbuildmat.2016.05.118

  • Physical and mechanical properties of polypropylene-wood-carbon fiber hybrid composites

    Journal article

    BioResources

    DOI: 10.15376/biores.11.1.1393-1406

  • Sprucing up the mixedwoods: Growth response of white spruce (picea glauca) to partial cutting in the eastern Canadian boreal forest

    Journal article

    Canadian Journal of Forest Research

    DOI: 10.1139/cjfr-2015-0489
2015

  • Effects of the cutting pattern and log provenance on size distribution of black spruce chips produced by a chipper-canter

    Journal article

    European Journal of Wood and Wood Products

    DOI: 10.1007/s00107-015-0894-0

  • Effects of wood fiber surface chemistry on strength of wood-plastic composites

    Journal article

    Applied Surface Science

    DOI: 10.1016/j.apsusc.2015.03.010

  • Efficacy of microwave irradiation for phytosanitation of wood packing materials

    Journal article

    Industrial Crops and Products

    DOI: 10.1016/j.indcrop.2015.01.030

  • Modeling of Combined Microwave and Convective Drying of Wood: Prediction of Mechanical Behavior via Internal Gas Pressure

    Journal article

    Drying Technology

    DOI: 10.1080/07373937.2015.1022828

  • Prediction of tracheid length and diameter in white spruce (Picea glauca)

    Journal article

    IAWA Journal

    DOI: 10.1163/22941932-00000095

  • Response of boreal jack pine (Pinus banksiana lamb.) Stands to a gradient of commercial thinning intensities, with and without N fertilization

    Journal article

    Forests

    DOI: 10.3390/f6082678

  • Studying dispersion quality of nanoparticles into a bio-based coating

    Journal article

    Progress in Organic Coatings

    DOI: 10.1016/j.porgcoat.2015.09.006

  • Vacuum contact drying kinetics of Jack pine wood and its influence on mechanical properties: industrial applications

    Journal article

    Heat and Mass Transfer/Waerme- und Stoffuebertragung

    DOI: 10.1007/s00231-014-1476-0

  • Variation in wood quality in white spruce (Picea glauca (Moench) Voss). Part I. defining the juvenile-mature wood transition based on tracheid length

    Journal article

    Forests

    DOI: 10.3390/f6010183
2014

  • Anatomical properties in Thuja occidentalis: Variation and relationship to biological processes

    Journal article

    IAWA Journal

    DOI: 10.1163/22941932-00000072

  • Effect of fiber origin, proportion, and chemical composition on the mechanical and physical properties of wood-plastic composites

    Journal article

    Journal of Wood Chemistry and Technology

    DOI: 10.1080/02773813.2013.869604

  • Effects of biodegradation by brown-rot decay on selected wood properties in eastern white cedar (Thuja occidentalis L.)

    Journal article

    International Biodeterioration and Biodegradation

    DOI: 10.1016/j.ibiod.2013.11.006

  • Effects of cutting parameters on cutting forces and surface quality of black spruce cants

    Journal article

    European Journal of Wood and Wood Products

    DOI: 10.1007/s00107-013-0762-8

  • Effects of temperature and moisture content on selected wood mechanical properties involved in the chipping process

    Journal article

    Wood Science and Technology

    DOI: 10.1007/s00226-014-0673-9

  • Introduction

    Journal article

    Canadian Journal of Forest Research

    DOI: 10.1139/cjfr-2014-0015

  • Moisture sorption isotherms and thermodynamic properties of Jack pine and palm wood: Comparative study

    Journal article

    Industrial Crops and Products

    DOI: 10.1016/j.indcrop.2014.03.004

  • Numerical investigation on phytosanitary treatment of frozen wood using microwave energy

    Journal article

    Canadian Journal of Chemical Engineering

    DOI: 10.1002/cjce.22060

  • The potential of paper mill sludge for wood-plastic composites

    Journal article

    Industrial Crops and Products

    DOI: 10.1016/j.indcrop.2014.01.013

  • Variation of the Physical and Mechanical Properties of Hybrid Poplar Clones

    Journal article

    BioResources

    DOI: 10.15376/BIORES.9.1.1456-1471

  • Wood quality iufro division 5 conference, estoril, portugal, 8-13 july 2012,Qualité du bois conférence du iufro division 5, estoril, portugal, 8-13 juillet 2012

    Journal article

    Canadian Journal of Forest Research

    See publication
2013

  • Numerical Modeling of Microwave Heating of Frozen Wood

    Journal article

    Canadian Journal of Chemical Engineering

  • Mechanical properties of MMA-hardened hybrid poplar wood

    Journal article

    Industrial Crops and Products

  • Effects of hot water treatment of raw bark, coupling agent, and lubricants on properties of bark/HDPE composites

    Journal article

    Industrial Crops and Products

  • Creep behaviour of HDPE/wood particle composites

    Journal article

    International Journal of Microstructure and Materials Properties

    DOI: 10.1504/IJMMP.2013.055385

  • EFFECTS OF CUTTING DIRECTION, RAKE ANGLE, AND DEPTH OF CUT ON CUTTING FORCES AND SURFACE QUALITY DURING MACHINING OF BALSAM FIR

    Journal article

    Wood and Fiber Science

    See publication

  • Effect of nanoparticles on the surface properties of natural oil-based wood flooring finishes

    Journal article

    Abstracts of Papers of the American Chemical Society

    See publication

  • Effect of the cutting speed on the surface quality of black spruce cants produced by a chipper-canter

    Journal article

    Forest Products Journal

    DOI: 10.13073/FPJ-D-13-00016

  • Effects of cutting direction, rake angle, and depth of cut on cutting forces and surface quality during machining of balsam fir

    Journal article

    Wood and Fiber Science

    See publication

  • Effects of hot water treatment of raw bark, coupling agent, and lubricants on properties of bark/HDPE composites

    Journal article

    Industrial Crops and Products

    DOI: 10.1016/j.indcrop.2012.05.012

  • Mechanical properties of MMA-hardened hybrid poplar wood

    Journal article

    Industrial Crops and Products

    DOI: 10.1016/j.indcrop.2013.02.004

  • Numerical modelling of microwave heating of frozen wood

    Journal article

    Canadian Journal of Chemical Engineering

    DOI: 10.1002/cjce.21826

  • Potential of pulp and paper secondary sludge as co-adhesive and formaldehyde scavenger for particleboard manufacturing

    Journal article

    European Journal of Wood and Wood Products

    DOI: 10.1007/s00107-013-0729-9

  • Reliability analysis of the methyl methacrylate hardened hybrid poplar wood

    Conference paper

    ICCM International Conferences on Composite Materials

    See publication

  • Seasonal effect on the chemical composition of the leaves of Stipa tenacissima L. and implications for pulp properties

    Journal article

    Industrial Crops and Products

    DOI: 10.1016/j.indcrop.2012.09.023

  • The study of methyl methacrylate hardened hybrid poplar wood

    Conference paper

    ICCM International Conferences on Composite Materials

    See publication

  • Variation of Brown Rot Decay in Eastern White Cedar (<i>Thuja occidentalis</i> L.)

    Journal article

    BioResources

    DOI: 10.15376/BIORES.8.3.4735-4755
2012

  • Surface properties of MMA-Hardened hybrid poplar wood

    Journal article

    Journal of Applied Polymer Science

  • ANATOMICAL PROPERTIES OF SELECTED HYBRID POPLAR CLONES GROWN IN SOUTHERN QUEBEC

    Journal article

    BioResources

    See publication

  • Anatomical properties of selected hybrid poplar clones grown in southern quebec

    Journal article

    BioResources

    See publication

  • DENSIFICATION OF WOOD VENEERS COMBINED WITH OIL-HEAT TREATMENT. PART II: HYGROSCOPICITY AND MECHANICAL PROPERTIES

    Journal article

    BioResources

    See publication

  • DIMENSIONAL STABILITY OF METHYL METHACRYLATE HARDENED HYBRID POPLAR WOOD

    Journal article

    BioResources

    See publication

  • Densification of wood veneers by compression combined with heat and steam

    Journal article

    European Journal of Wood and Wood Products

    DOI: 10.1007/s00107-011-0524-4

  • Densification of wood veneers combined with oil-heat treatment. Part II: Hygroscopicity and mechanical properties

    Journal article

    BioResources

    See publication

  • Fire-retardant properties of wood particleboards treated with boric acid

    Journal article

    European Journal of Wood and Wood Products

    DOI: 10.1007/s00107-011-0538-y

  • Mechanical and physical properties of particleboard made from two pulp and paper mill secondary sludges

    Journal article

    World Journal of Engineering

    DOI: 10.1260/1708-5284.9.1.31

  • Surface properties of methyl methacrylate hardened hybrid poplar wood

    Journal article

    Journal of Applied Polymer Science

    DOI: 10.1002/app.33799

  • THE USE OF PAPER MILL BIOTREATMENT RESIDUE AS FURNISH OR AS A BONDING AGENT IN THE MANUFACTURE OF FIBRE-BASED BOARDS

    Journal article

    J-FOR-Journal of Science & Technology for Forest Products and Processes

    See publication

  • The use of paper mill biotreatment residue as furnish or as a bonding agent in the manufacture of fibre-based boards

    Journal article

    J-FOR

    See publication

  • Variations in the morphological characteristics of Stipa tenacissima fiber: The case of Tunisia

    Journal article

    Industrial Crops and Products

    DOI: 10.1016/j.indcrop.2011.11.021
2011

  • Application of micromechanical models to tensile properties of wood-plastic composites

    Journal article

    Wood Science and Technology

    DOI: 10.1007/s00226-010-0351-5

  • BINDERLESS FIBERBOARD MADE FROM PRIMARY AND SECONDARY PULP AND PAPER SLUDGE

    Journal article

    Wood and Fiber Science

    See publication

  • Binderless fiberboard made from primary and secondary pulp and paper sludge

    Journal article

    Wood and Fiber Science

    See publication

  • DENSIFICATION OF WOOD VENEERS COMBINED WITH OIL-HEAT TREATMENT. PART I: DIMENSIONAL STABILITY

    Journal article

    BioResources

    See publication

  • Densification of wood veneers combined with oilheat treatment. Part I: Dimensional stability

    Journal article

    BioResources

    See publication

  • Design of Fuel Cell and Electrolyzer Emulators for Photovoltaic Applications

    Journal article

    International Aegean Conference on Electrical Machines and Power Electronics & Electromotion Joint Conference

    DOI: 10.1109/ACEMP.2011.6490683

  • Effects of thermo-hygro-mechanical densification on the surface characteristics of trembling aspen and hybrid poplar wood veneers

    Journal article

    Applied Surface Science

    DOI: 10.1016/j.apsusc.2010.11.074

  • Potential of pulp and paper sludge as a formaldehyde scavenger agent in MDF resins

    Journal article

    Holzforschung

    DOI: 10.1515/HF.2011.039

  • Variation in black spruce (Picea mariana (Mill.) BSP) wood quality after thinning

    Journal article

    Annals of Forest Science

    DOI: 10.1007/s13595-011-0127-6
2010

  • EFFECT OF CUTTING WIDTH AND CUTTING HEIGHT ON THE SURFACE QUALITY OF BLACK SPRUCE CANTS PRODUCED BY A CHIPPER-CANTER

    Journal article

    Wood and Fiber Science

    See publication

  • EFFECTS OF COMPOSITE PROCESSING METHODS ON WOOD PARTICLE DEVELOPMENT AND LENGTH DISTRIBUTION: CONSEQUENCES ON MECHANICAL PROPERTIES OF WOOD-THERMOPLASTIC COMPOSITES

    Journal article

    Wood and Fiber Science

    See publication

  • Effect of bark fiber content and size on the mechanical properties of bark/HDPE composites

    Journal article

    Composites Part A: Applied Science and Manufacturing

    DOI: 10.1016/j.compositesa.2009.06.005

  • Effect of cutting width and cutting height on the surface quality of black spruce cants produced by a chipper-canter

    Journal article

    Wood and Fiber Science

    See publication

  • Effects of composite processing methods on wood particle development and length distribution: Consequences on mechanical properties of wood-thermoplastic composites

    Journal article

    Wood and Fiber Science

    See publication

  • Effects of radial growth, tree age, climate, and seed origin on wood density of diverse jack pine populations

    Journal article

    Trees - Structure and Function

    DOI: 10.1007/s00468-009-0378-0

  • MEDIUM-DENSITY FIBERBOARD PRODUCED USING PULP AND PAPER SLUDGE FROM DIFFERENT PULPING PROCESSES

    Journal article

    Wood and Fiber Science

    See publication

  • Medium-density fiberboard produced using pulp and paper sludge from different pulping processes

    Journal article

    Wood and Fiber Science

    See publication
2009

  • EFFECTS OF CAMBIAL AGE AND STEM HEIGHT ON WOOD DENSITY AND GROWTH OF JACK PINE GROWN IN BOREAL STANDS

    Journal article

    Wood and Fiber Science

    See publication

  • Effects of cambial age and stem height on wood density and growth of jack pine grown in boreal stands

    Journal article

    Wood and Fiber Science

    See publication

  • Effects of fiber characteristics on the physical and mechanical properties of wood plastic composites

    Journal article

    Composites Part A: Applied Science and Manufacturing

    DOI: 10.1016/j.compositesa.2009.06.003

  • Effects of processing method and fiber size on the structure and properties of wood-plastic composites

    Journal article

    Composites Part A: Applied Science and Manufacturing

    DOI: 10.1016/j.compositesa.2008.10.004

  • Engineering investigations on the potentiality of the thermoformability of HDPE charged by wood flours in the thermoforming part

    Journal article

    Polymer Engineering and Science

    DOI: 10.1002/pen.21394

  • Improving the fire performance of wood products

    Conference paper

    International Conference on Nanotechnology for the Forest Products Industry 2009

    See publication

  • Wood particle/high-density polyethylene composites: thermal sensitivity and nucleating ability of wood particles

    Journal article

    Journal of Applied Polymer Science

    DOI: 10.1002/app.30129
2008

  • Analysis of among-species variability in wood fiber surface using DRIFTS and XPS: Effects on esterification efficiency

    Journal article

    Journal of Wood Chemistry and Technology

    DOI: 10.1080/02773810802485139

  • Complex dielectric properties of the sapwood of aspen, white birch, yellow birch, and sugar maple

    Journal article

    Drying Technology

    DOI: 10.1080/07373930801944762

  • Effect of fiber length on processing and properties of extruded wood-fiber/HDPE composites

    Journal article

    Journal of Applied Polymer Science

    DOI: 10.1002/app.28720

  • Effect of interannual climate variations on radial growth of jack pine provenances in Petawawa, Ontario

    Journal article

    Canadian Journal of Forest Research

    DOI: 10.1139/X07-178

  • Effect of the fiber size on the physicochemical and mechanical properties of composites of epoxy and date palm tree fibers

    Journal article

    Macromolecular Materials and Engineering

    DOI: 10.1002/mame.200800087

  • Effects of bark content and particle geometry on the physical and mechanical properties of particleboard made from black spruce and trembling aspen bark

    Journal article

    Forest Products Journal

    See publication

  • Effects of bark content and particle geometry on the physical and mechanical properties of particleboard made from black spruce and trembling aspen bark

    Journal article

    Forest Products Journal

    See publication

  • Effects of hot-water treatment of black spruce and trembling aspen bark raw material on the physical and mechanical properties of bark particleboard

    Journal article

    Wood and Fiber Science

    See publication

  • Effects of hot-water treatment of black spruce and trembling aspen bark raw material on the physical and mechanical properties of bark particleboard

    Journal article

    Wood and Fiber Science

    See publication

  • Physical and mechanical properties of particleboard made from extracted black spruce and trembling aspen bark

    Journal article

    Forest Products Journal

    See publication

  • Physical and mechanical properties of particleboard made from extracted black spruce and trembling aspen bark

    Journal article

    Forest Products Journal

    See publication

  • Relationship between wood porosity, wood density and methyl methacrylate impregnation rate

    Journal article

    Wood Material Science and Engineering

    DOI: 10.1080/17480270802607947
2007

  • Seed transfer and climate change effects on radial growth of jack pine populations in a common garden in Petawawa, Ontario, Canada

    Journal article

    Forest Ecology and Management

    DOI: 10.1016/j.foreco.2007.01.073
2005

  • Transition from juvenile to mature wood in black spruce (<i>Picea mariana</i> (Mill.) BSP)

    Journal article

    Wood and Fiber Science

    See publication

  • Transition from juvenile to mature wood in black spruce (Picea mariana (Mill.) B.S.P.)

    Journal article

    Wood and Fiber Science

    See publication
2003

  • Selection for Both Growth and Wood Properties in Hybrid Poplar Clones

    Journal article

    Forest Science

    See publication

  • Selection for both growth and wood properties in hybrid poplar clones

    Journal article

    Forest Science

    See publication
2002

  • Defining the transition from earlywood to latewood in black spruce based on intra-ring wood density profiles from X-ray densitometry

    Journal article

    Annals of Forest Science

    See publication

  • Defining the transition from earlywood to latewood in black spruce based on intra-ring wood density profiles from X-ray densitometry

    Journal article

    Annals of Forest Science

    DOI: 10.1051/FOREST:2002035
2000

  • Phenotypic correlations between juvenile-mature wood density and growth in black spruce

    Journal article

    Wood and Fiber Science

    See publication

  • Phenotypic correlations between juvenile-mature wood density and growth in black spruce

    Journal article

    Wood and Fiber Science

    See publication
1998

  • Interclonal, intraclonal, and within-tree variation in fiber length of poplar hybrid clones

    Journal article

    Wood and Fiber Science

    See publication

  • Interclonal, intraclonal, and within-tree variation in fiber length of poplar hybrid clones

    Journal article

    Wood and Fiber Science

    See publication

  • Selected mechanical properties of fast-growing poplar hybrid clones

    Journal article

    Wood and Fiber Science

    See publication

  • Selected mechanical properties of fast-growing poplar hybrid clones

    Journal article

    Wood and Fiber Science

    See publication

  • Shrinkage of fast-growing hybrid poplar clones

    Journal article

    Forest Products Journal

    See publication

  • Shrinkage of fast-growing hybrid poplar clones

    Journal article

    Forest Products Journal

    See publication
1996
1995

  • MEASURE OF THE INTERNAL BOND STRENGTH OF PAPER BOARD

    Journal article

    TAPPI Journal

    See publication

  • Measure of the internal bond strength of paper/board

    Journal article

    Tappi journal

    See publication
1992

  • INTERCLONAL, INTRACLONAL AND WITHIN-TREE VARIATION IN WOOD DENSITY OF POLAR HYBRID CLONES

    Journal article

    Wood and Fiber Science

    See publication