Ahmed Koubaa - Fiche du membre du personnel

Ahmed Koubaa, Ph. D.

Professeur

Campus de Rouyn-Noranda

Local :: F-209
Téléphone :: 819 762-0971 poste 2579(s'ouvre dans un nouvel onglet)
Sans frais :: +1 877 870-8728 poste 2579(s'ouvre dans un nouvel onglet)

Courriel :: ahmed.koubaa@uqat.ca(s'ouvre dans un nouvel onglet)

Domaines d'expertise

Caractérisation de la qualité du bois des essences à croissance rapide
Valorisation du bois des essences à croissance rapide pour des applications à haute valeur ajoutée
Étude des variations génétiques et phénotypiques en fonction des traitements sylvicoles des propriétés de la fibre et du bois
Développement de nouvelles technologies de production de biomatériaux à base de bois et des polymères

Publications

Source : ORCID(s'ouvre dans un nouvel onglet)

2026

Biomass Hydrogel for Wound Dressings: Design, Functionalization and Application
Article de journal
Small
DOI: 10.1002/smll.74130(s'ouvre dans un nouvel onglet)
Biochemical Methane Yield and Process Performance in Thermophilic Anaerobic Digestion of Abandoned Organic Solid Wastes
Article de journal
Energies
DOI: 10.3390/en19040921(s'ouvre dans un nouvel onglet)

2025

Enhancing Fire Resistance and Mechanical Properties of Wood Strand Boards by Impregnation with Sodium Bicarbonate and Sodium Borate
Article de journal
Polymers
DOI: 10.3390/polym17212943(s'ouvre dans un nouvel onglet)
Development and Characterization of Scented PLA-Based Biocomposites Reinforced with Spent Coffee Grounds and Lignin for FDM 3D Printing
Article de journal
Polymers
DOI: 10.3390/polym17212836(s'ouvre dans un nouvel onglet)
Effect of Printing Temperature on the Microstructure and Tensile Properties of Polylactic Acid–Magnetic Iron Composites Manufactured by Material Extrusion
Article de journal
Polymers
DOI: 10.3390/polym17182485(s'ouvre dans un nouvel onglet)
Upcycling Spent Coffee Grounds-Based Composite for 3D Printing: A Review of Current Research
Article de journal
Journal of Composites Science
DOI: 10.3390/jcs9090467(s'ouvre dans un nouvel onglet)
Impact of Fiber Morphology and Content on the Thermal Stability, and Mechanical Performance of Maple Wood Fiber‐Polypropylene Composites
Article de journal
Journal of Applied Polymer Science
DOI: 10.1002/app.57211(s'ouvre dans un nouvel onglet)
Performance of Oriented Strand Boards Made with Jack Pine Strands Produced by an Innovative Strander-Canter
Article de journal
Forests
DOI: 10.3390/f16081227(s'ouvre dans un nouvel onglet)
Innovative Valorization of Wood Panel Waste into Activated Biochar for Efficient Phenol Adsorption
Article de journal
Applied Sciences
DOI: 10.3390/app15158518(s'ouvre dans un nouvel onglet)
Performance of Oriented Strand Boards Made with Jack Pine Strands Produced by an Innovative Strander-Canter
Prépublication
DOI: 10.20944/preprints202506.2322.v1(s'ouvre dans un nouvel onglet)
3D‐printing continuous plant fiber/polylactic acid composites with lightweight and high strength
Article de journal
Polymer Composites
DOI: 10.1002/pc.29178(s'ouvre dans un nouvel onglet)
Metallic contaminants in wood panel production process: Evaluating press plate damage and detecting potential using IR thermography and spectroscopy
Article de journal
International Journal of Damage Mechanics
DOI: 10.1177/10567895241297301(s'ouvre dans un nouvel onglet)
A Review of Operational Conditions of the Agroforestry Residues Biomethanization for Bioenergy Production Through Solid-State Anaerobic Digestion (SS-AD)
Article de journal
Energies
DOI: 10.3390/en18061397(s'ouvre dans un nouvel onglet)
Variations in ring width density and tracheid morphology of tamarack wood (Larix laricina)
Article de journal
Canadian Journal of Forest Research
DOI: 10.1139/cjfr-2024-0288(s'ouvre dans un nouvel onglet)
Suitability of 3D-Printed Cellulose-Based Polymer Materials for Electrical Insulation Applications
Chapitre de livre
DOI: 10.1007/978-3-031-79110-9_16(s'ouvre dans un nouvel onglet)

2024

Evaluating the properties of deinking paper sludge from the Mediterranean area for recycling in local areas as a soil amendment and to enhance growth substrates
Article de journal
Euro-Mediterranean Journal for Environmental Integration
DOI: 10.1007/s41207-024-00510-6(s'ouvre dans un nouvel onglet)
Effect of Wood Species on Lignin-Retaining High-Transmittance Transparent Wood Biocomposites
Article de journal
Polymers
DOI: 10.3390/polym16172493(s'ouvre dans un nouvel onglet)
Sustainability, Circularity, and Innovation in Wood-based Panel Manufacturing in the 2020s: Opportunities and Challenges
Article de journal
Current Forestry Reports
DOI: 10.1007/s40725-024-00229-1(s'ouvre dans un nouvel onglet)
Recent Advances in Bio-Based Adhesives and Formaldehyde-Free Technologies for Wood-Based Panel Manufacturing
Article de journal
Current Forestry Reports
DOI: 10.1007/s40725-024-00227-3(s'ouvre dans un nouvel onglet)
Optimizing the Dielectric and Mechanical Performance of 3D-Printed Cellulose-Based Biocomposites and Bionanocomposites through Factorial Design for Electrical Insulation Application
Article de journal
Polymers
DOI: 10.3390/polym16152117(s'ouvre dans un nouvel onglet)
Characterization of Posidonia oceanica Fibers High-Density Polyethylene Composites: Reinforcing Potential and Effect of Coupling Agent
Article de journal
Journal of Composites Science
DOI: 10.3390/jcs8070236(s'ouvre dans un nouvel onglet)
Investigation of Thermomechanical and Dielectric Properties of PLA-CA 3D-Printed Biobased Materials
Article de journal
Journal of Composites Science
DOI: 10.3390/jcs8060197(s'ouvre dans un nouvel onglet)
Visible Light-Induced Photocatalytic Degradation of Methylene Blue Using Copper-Doped Carbon Dots One-Step Derived from CCA-Wood
Article de journal
Forests
DOI: 10.3390/f15040680(s'ouvre dans un nouvel onglet)
A paradigm shift towards production of sustainable bioenergy and advanced products from Cannabis/hemp biomass in Canada
Article de journal
Biomass Conversion and Biorefinery
DOI: 10.1007/S13399-022-02570-6(s'ouvre dans un nouvel onglet)

2023

How Do 3D Printing Parameters Affect the Dielectric and Mechanical Performance of Polylactic Acid–Cellulose Acetate Polymer Blends?
Article de journal
Journal of Composites Science
DOI: 10.3390/jcs7120492(s'ouvre dans un nouvel onglet)
The Role Played by the Rake Angle of a Strander-Canter When Processing Jack Pine Logs
Article de journal
Forests
DOI: 10.3390/f14112182(s'ouvre dans un nouvel onglet)
A Comparative Study on Heavy Metal Removal from CCA-Treated Wood Waste by Yarrowia lipolytica: Effects of Metal Stress
Article de journal
Journal of Fungi
DOI: 10.3390/jof9040469(s'ouvre dans un nouvel onglet)
Chemical Elements Content and Distributions within Different Tissue Types of White Spruce
Article de journal
Energies
DOI: 10.3390/en16073257(s'ouvre dans un nouvel onglet)
Analysis of the interaction between internal porosity and oriented strand board performance using X-ray computed tomography
Article de journal
European Journal of Wood and Wood Products
DOI: 10.1007/s00107-022-01884-6(s'ouvre dans un nouvel onglet)
Activities of cellulose acetate and microcrystalline cellulose on the thermal and morphomechanical performances of a biobased hybrid composite made polybutylene succinate
Article de journal
International Journal of Biological Macromolecules
DOI: 10.1016/J.IJBIOMAC.2023.126918(s'ouvre dans un nouvel onglet)
Advances in Modified Wood-Based Adsorbents for Contaminant Removal: Valorization Methods, Modification Mechanisms, and Environmental Applications
Article de journal
Current Forestry Reports
DOI: 10.1007/S40725-023-00200-6(s'ouvre dans un nouvel onglet)
Dielectric and rheological performances of cellulose acetate, polylactic acid and polyhydroxybutyrate-co-valerate biobased blends
Article de journal
Polymer
DOI: 10.1016/J.POLYMER.2023.126358(s'ouvre dans un nouvel onglet)
Effects of Wood Species on the Energy Requirements and Size Distribution of Strands Produced by a Strander- Canter
Article de journal
BioResources
DOI: 10.15376/BIORES.18.3.5873-5886(s'ouvre dans un nouvel onglet)

2022

Copper-Doped Carbon Nanodots with Superior Photocatalysis, Directly Obtained from Chromium-Copper-Arsenic-Treated Wood Waste
Article de journal
Polymers
DOI: 10.3390/polym15010136(s'ouvre dans un nouvel onglet)
Regional, Site, and Tree Variations of Wood Density and Growth in Thuja occidentalis L. in the Quebec Forest
Article de journal
Forests
DOI: 10.3390/f13121984(s'ouvre dans un nouvel onglet)
Influence of Four Spacings between Trees and Four Samplings Heights on Selected Wood Quality Attributes of White Spruce (Picea glauca (Moench) Voss)
Article de journal
Forests
DOI: 10.3390/f13111807(s'ouvre dans un nouvel onglet)
Fire Behavior and Failure Model of Multilayered Wood Flour/HDPE/Polycarbonate Composites with a Sandwich Structure
Article de journal
Polymers
DOI: 10.3390/polym14142833(s'ouvre dans un nouvel onglet)
Pyrolysis of Chromated Copper Arsenate-Treated Wood: Investigation of Temperature, Granulometry, Biochar Yield, and Metal Pathways
Article de journal
Energies
DOI: 10.3390/en15145071(s'ouvre dans un nouvel onglet)
Synthesis and Characterization of Wood Rigid Polyurethane Composites
Article de journal
Materials
DOI: 10.3390/ma15124316(s'ouvre dans un nouvel onglet)
Physical and Mechanical Properties of Oriented Strand Board Made from Eastern Canadian Softwood Species
Article de journal
Forests
DOI: 10.3390/f13040523(s'ouvre dans un nouvel onglet)
Comparison between static modulus of elasticity, non-destructive testing moduli of elasticity and stress-wave speed in white spruce and lodgepole pine wood
Article de journal
Wood Material Science and Engineering
DOI: 10.1080/17480272.2021.1871949(s'ouvre dans un nouvel onglet)
Effects of Strands Geometry on the Physical and Mechanical Properties of Oriented Strand Boards (OSBs) Made from Black Spruce and Trembling Aspen
Article de journal
BioResources
DOI: 10.15376/BIORES.17.3.3929-3943(s'ouvre dans un nouvel onglet)
The emerging development of transparent wood: materials, characteristics, and applications
Article de journal
Current Forestry Reports
DOI: 10.1007/S40725-022-00172-Z(s'ouvre dans un nouvel onglet)
Towards Strand Production in Primary Log Breakdown: Effects of the Counter-Knife and Temperature on Size Distribution of Jack Pine Strands
Article de journal
BioResources
DOI: 10.15376/BIORES.17.2.2632-2651(s'ouvre dans un nouvel onglet)

2021

Variation of White Spruce Carbon Content with Age, Height, Social Classes and Silvicultural Management
Article de journal
Energies
DOI: 10.3390/en14238015(s'ouvre dans un nouvel onglet)
Xerogel-like Materials from Sustainable Sources: Properties and Electrochemical Performances
Article de journal
Energies
DOI: 10.3390/en14237977(s'ouvre dans un nouvel onglet)
Dielectric properties and thermal stability of cellulose high-density polyethylene bio-based composites
Article de journal
Industrial Crops and Products
DOI: 10.1016/j.indcrop.2021.113928(s'ouvre dans un nouvel onglet)
Effect of Pyrolysis Temperature and Wood Species on the Properties of Biochar Pellets
Article de journal
Energies
DOI: 10.3390/en14206529(s'ouvre dans un nouvel onglet)
Flammability, thermal stability, and mechanical properties of wood flour/polycarbonate/polyethylene bio-based composites
Article de journal
Industrial Crops and Products
DOI: 10.1016/j.indcrop.2021.113638(s'ouvre dans un nouvel onglet)
Effects of Chromic Treatment on the Surface Properties of Polypropylene (PP) Wood Composites
Article de journal
Coatings
DOI: 10.3390/coatings11070851(s'ouvre dans un nouvel onglet)
Mitigation of CO2, CH4 and N2O from Acidic Clayey Soil Amended with Fertilizer Pellets Based on Alkaline Organic Residues
Article de journal
Waste and Biomass Valorization
DOI: 10.1007/s12649-020-01276-y(s'ouvre dans un nouvel onglet)
Fire Retardancy, Water Absorption, and Viscoelasticity of Borated Wood—Polycarbonate Biocomposites
Article de journal
Polymers
DOI: 10.3390/polym13142234(s'ouvre dans un nouvel onglet)
Effects of Coating on the Dimensional Stability of Wood-Polymer Composites
Article de journal
Coatings
DOI: 10.3390/coatings11060711(s'ouvre dans un nouvel onglet)
Dielectric Properties of Wood-Polymer Composites: Effects of Frequency, Fiber Nature, Proportion, and Chemical Composition
Article de journal
Journal of Composites Science
DOI: 10.3390/jcs5060141(s'ouvre dans un nouvel onglet)
Short-Term Effects of Biosolid Application on Two Mediterranean Agricultural Soils and Durum Wheat Yield
Article de journal
Agronomy
DOI: 10.3390/agronomy11040709(s'ouvre dans un nouvel onglet)
Investigation of sustainable porous carbon as radar absorbing material
Article de journal
Matéria (Rio de Janeiro)
DOI: 10.1590/s1517-707620210002.1263(s'ouvre dans un nouvel onglet)

2020

CO2 Emission and Change in the Fertility Parameters of a Calcareous Soil Following Annual Applications of Deinking Paper Sludge (The Case of Tunisia)
Article de journal
Agronomy
DOI: 10.3390/agronomy10070956(s'ouvre dans un nouvel onglet)
Effect of the Pyro-Gasification Temperature of Wood on the Physical and Mechanical Properties of Biochar-Polymer Biocomposites
Article de journal
Materials
DOI: 10.3390/ma13061327(s'ouvre dans un nouvel onglet)
3D finite element enthalpy method for analysis of phytosanitary treatment of wood by microwave
Article de journal
European Journal of Wood and Wood Products
DOI: 10.1007/S00107-020-01534-9(s'ouvre dans un nouvel onglet)
Conversion of lignocellulose into biochar and furfural through boron complexation and esterification reactions
Article de journal
Bioresource Technology
DOI: 10.1016/J.BIORTECH.2020.123586(s'ouvre dans un nouvel onglet)
Dielectric characterization of white birch-activated biochar composites: A sustainable alternative to radar-absorbing materials
Article de journal
Journal of Composite Materials
DOI: 10.1177/0021998319877493(s'ouvre dans un nouvel onglet)
Efficiency of eight modified materials for As(V) removal from synthetic and real mine effluents
Article de journal
Minerals Engineering
DOI: 10.1016/J.MINENG.2020.106310(s'ouvre dans un nouvel onglet)
High-performance lignocellulose/polycarbonate biocomposites fabricated by in situ reaction: Structure and properties
Article de journal
Composites Part A: Applied Science and Manufacturing
DOI: 10.1016/J.COMPOSITESA.2020.106068(s'ouvre dans un nouvel onglet)
Improving lignocellulose thermal stability by chemical modification with boric acid for incorporating into polyamide
Article de journal
Materials & Design
DOI: 10.1016/J.MATDES.2020.108589(s'ouvre dans un nouvel onglet)
Microbial remediation for the removal of inorganic contaminants from treated wood: Recent trends and challenges
Article de journal
Chemosphere
DOI: 10.1016/J.CHEMOSPHERE.2020.127429(s'ouvre dans un nouvel onglet)
Production of Bio-based Polyol from Oxypropylated Pyrolytic Lignin for Rigid Polyurethane Foam Application
Article de journal
Waste and Biomass Valorization
DOI: 10.1007/S12649-019-00876-7(s'ouvre dans un nouvel onglet)
The conversion of wood residues, using pilot-scale technologies, into porous activated biochars for supercapacitors
Article de journal
Journal of Porous Materials
DOI: 10.1007/S10934-019-00823-W(s'ouvre dans un nouvel onglet)

2019

Reinforcement of continuous fibers for extruded wood-flour/HDPE composites: Effects of fiber type and amount
Article de journal
Construction and Building Materials
DOI: 10.1016/j.conbuildmat.2019.116718(s'ouvre dans un nouvel onglet)
Effect of Forest Biomass Pretreatment on Essential Oil Yield and Properties
Article de journal
Forests
DOI: 10.3390/f10111042(s'ouvre dans un nouvel onglet)
Influence of Stem Taper on the Yield of Black Spruce Stands and Trees Following Commercial Thinning
Article de journal
Forests
DOI: 10.3390/f10111024(s'ouvre dans un nouvel onglet)
Effect of Seed Transfer on Selected Wood Quality Attributes of Jack Pine (Pinus banksiana Lamb.)
Article de journal
Forests
DOI: 10.3390/f10110985(s'ouvre dans un nouvel onglet)
Deinking sludge compost stability and maturity assessment using Fourier transform infrared spectroscopy and thermal analysis
Article de journal
Waste Management & Research: The Journal for a Sustainable Circular Economy
DOI: 10.1177/0734242X19864638(s'ouvre dans un nouvel onglet)
Enhanced SO2 adsorption and desorption on chemically and physically activated biochar made from wood residues
Article de journal
Industrial Crops and Products
DOI: 10.1016/j.indcrop.2019.06.019(s'ouvre dans un nouvel onglet)
Phenotypic Correlations among Growth and Selected Wood Properties in White Spruce (Picea glauca (Moench) Voss) †
Article de journal
Forests
DOI: 10.3390/f10070589(s'ouvre dans un nouvel onglet)
Intra-Ring Wood Density and Dynamic Modulus of Elasticity Profiles for Black Spruce and Jack Pine from X-Ray Densitometry and Ultrasonic Wave Velocity Measurement
Article de journal
Forests
DOI: 10.3390/f10070569(s'ouvre dans un nouvel onglet)
Effect of fiber and polymer variability on the rheological properties of wood polymer composites during processing
Article de journal
Polymer Composites
DOI: 10.1002/pc.24909(s'ouvre dans un nouvel onglet)
Influence of Pyro-Gasification and Activation Conditions on the Porosity of Activated Biochars: A Literature Review
Article de journal
Waste and Biomass Valorization
DOI: 10.1007/s12649-019-00797-5(s'ouvre dans un nouvel onglet)
Intra-ring variations and interrelationships for selected wood anatomical and physical properties of Thuja occidentalis L
Article de journal
Forests
DOI: 10.3390/f10040339(s'ouvre dans un nouvel onglet)
Performance of Physically and Chemically Activated Biochars in Copper Removal from Contaminated Mine Effluents
Article de journal
Water, Air, and Soil Pollution
DOI: 10.1007/s11270-019-4233-7(s'ouvre dans un nouvel onglet)
Use of wood residues for the production of highly porous materials for environmental application and energy storage
Article de journal
Abstracts of Papers of the American Chemical Society
Voir les publications(s'ouvre dans un nouvel onglet)

2018

The influence of pilot-scale pyro-gasification and activation conditions on porosity development in activated biochars
Article de journal
Biomass and Bioenergy
DOI: 10.1016/j.biombioe.2018.08.016(s'ouvre dans un nouvel onglet)
Synergetic effect of Posidonia oceanica fibres and deinking paper sludge on the thermo-mechanical properties of high density polyethylene composites
Article de journal
Industrial Crops and Products
DOI: 10.1016/j.indcrop.2018.04.075(s'ouvre dans un nouvel onglet)
Rheological behavior of high‐density polyethylene (HDPE) filled with paper mill sludge
Article de journal
Journal of Applied Polymer Science
DOI: 10.1002/app.46484(s'ouvre dans un nouvel onglet)
Activated Biochar as an Effective Sorbent for Organic and Inorganic Contaminants in Water
Article de journal
Water, Air, and Soil Pollution
DOI: 10.1007/s11270-018-3889-8(s'ouvre dans un nouvel onglet)
Effects of commercial thinning, log position in the stem, and cutting width on the surface quality of cants produced by a chipper-canter
Article de journal
Wood Material Science and Engineering
DOI: 10.1080/17480272.2016.1232308(s'ouvre dans un nouvel onglet)
Microwave drying kinetics of jack pine wood: determination of phytosanitary efficacy, energy consumption, and mechanical properties
Article de journal
European Journal of Wood and Wood Products
DOI: 10.1007/s00107-018-1316-x(s'ouvre dans un nouvel onglet)
Numerical and experimental assessment of water absorption of wood-polymer composites
Article de journal
Measurement: Journal of the International Measurement Confederation
DOI: 10.1016/j.measurement.2017.10.011(s'ouvre dans un nouvel onglet)
Phenotypic and genotypic correlations for wood properties of hybrid poplar clones of Southern Quebec
Article de journal
Forests
DOI: 10.3390/f9030140(s'ouvre dans un nouvel onglet)
Production, characterization, and potential of activated biochar as adsorbent for phenolic compounds from leachates in a lumber industry site
Article de journal
Environmental Science and Pollution Research
DOI: 10.1007/s11356-018-2712-9(s'ouvre dans un nouvel onglet)
Tensile properties, thermal conductivity, and thermal stability of short carbon fiber reinforced polypropylene composites
Article de journal
Polymer Composites
DOI: 10.1002/pc.24093(s'ouvre dans un nouvel onglet)

2017

Effect of High Content of Deinking Paper Sludge (DPS) on the Reinforcement of HDPE
Article de journal
Journal of Polymers and the Environment
DOI: 10.1007/s10924-016-0837-9(s'ouvre dans un nouvel onglet)
Effects of log position in the stem and commercial thinning on jack pine chip dimensions produced by a chipper-canter
Article de journal
European Journal of Wood and Wood Products
DOI: 10.1007/s00107-016-1062-x(s'ouvre dans un nouvel onglet)
Influence of polymer powder on properties of cemented paste backfill
Article de journal
International Journal of Mineral Processing
DOI: 10.1016/j.minpro.2017.07.013(s'ouvre dans un nouvel onglet)
Morphological, mechanical, and physical properties of composites made with wood flour-reinforced polypropylene/recycled poly(ethylene terephthalate) blends
Article de journal
Polymer Composites
DOI: 10.1002/pc.23745(s'ouvre dans un nouvel onglet)
Robust DEA to assess the reliability of methyl methacrylate-hardened hybrid poplar wood
Article de journal
Annals of Operations Research
DOI: 10.1007/s10479-016-2201-9(s'ouvre dans un nouvel onglet)

2016

Chemical composition and surface properties of paper mill sludge and their impact on high density polyethylene (HDPE) composites
Article de journal
Journal of Wood Chemistry and Technology
DOI: 10.1080/02773813.2015.1057647(s'ouvre dans un nouvel onglet)
EFFECTS OF LOG POSITION IN THE STEM AND CUTTING WIDTH ON SIZE DISTRIBUTION OF BLACK SPRUCE CHIPS PRODUCED BY A CHIPPER-CANTER
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
Effects of log position in the stem and cutting width on size distribution of black spruce chips produced by a chipper-canter
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
Experimental investigation into the compressive strength development of cemented paste backfill containing Nano-silica
Article de journal
Cement and Concrete Composites
DOI: 10.1016/j.cemconcomp.2016.06.016(s'ouvre dans un nouvel onglet)
Experimental investigation of mechanical and microstructural properties of cemented paste backfill containing maple-wood filler
Article de journal
Construction and Building Materials
DOI: 10.1016/j.conbuildmat.2016.05.118(s'ouvre dans un nouvel onglet)
Physical and mechanical properties of polypropylene-wood-carbon fiber hybrid composites
Article de journal
BioResources
DOI: 10.15376/biores.11.1.1393-1406(s'ouvre dans un nouvel onglet)
Sprucing up the mixedwoods: Growth response of white spruce (picea glauca) to partial cutting in the eastern Canadian boreal forest
Article de journal
Canadian Journal of Forest Research
DOI: 10.1139/cjfr-2015-0489(s'ouvre dans un nouvel onglet)

2015

Effects of the cutting pattern and log provenance on size distribution of black spruce chips produced by a chipper-canter
Article de journal
European Journal of Wood and Wood Products
DOI: 10.1007/s00107-015-0894-0(s'ouvre dans un nouvel onglet)
Effects of wood fiber surface chemistry on strength of wood-plastic composites
Article de journal
Applied Surface Science
DOI: 10.1016/j.apsusc.2015.03.010(s'ouvre dans un nouvel onglet)
Efficacy of microwave irradiation for phytosanitation of wood packing materials
Article de journal
Industrial Crops and Products
DOI: 10.1016/j.indcrop.2015.01.030(s'ouvre dans un nouvel onglet)
Modeling of Combined Microwave and Convective Drying of Wood: Prediction of Mechanical Behavior via Internal Gas Pressure
Article de journal
Drying Technology
DOI: 10.1080/07373937.2015.1022828(s'ouvre dans un nouvel onglet)
Prediction of tracheid length and diameter in white spruce (Picea glauca)
Article de journal
IAWA Journal
DOI: 10.1163/22941932-00000095(s'ouvre dans un nouvel onglet)
Response of boreal jack pine (Pinus banksiana lamb.) Stands to a gradient of commercial thinning intensities, with and without N fertilization
Article de journal
Forests
DOI: 10.3390/f6082678(s'ouvre dans un nouvel onglet)
Studying dispersion quality of nanoparticles into a bio-based coating
Article de journal
Progress in Organic Coatings
DOI: 10.1016/j.porgcoat.2015.09.006(s'ouvre dans un nouvel onglet)
Vacuum contact drying kinetics of Jack pine wood and its influence on mechanical properties: industrial applications
Article de journal
Heat and Mass Transfer/Waerme- und Stoffuebertragung
DOI: 10.1007/s00231-014-1476-0(s'ouvre dans un nouvel onglet)
Variation in wood quality in white spruce (Picea glauca (Moench) Voss). Part I. defining the juvenile-mature wood transition based on tracheid length
Article de journal
Forests
DOI: 10.3390/f6010183(s'ouvre dans un nouvel onglet)

2014

Anatomical properties in Thuja occidentalis: Variation and relationship to biological processes
Article de journal
IAWA Journal
DOI: 10.1163/22941932-00000072(s'ouvre dans un nouvel onglet)
Effect of fiber origin, proportion, and chemical composition on the mechanical and physical properties of wood-plastic composites
Article de journal
Journal of Wood Chemistry and Technology
DOI: 10.1080/02773813.2013.869604(s'ouvre dans un nouvel onglet)
Effects of biodegradation by brown-rot decay on selected wood properties in eastern white cedar (Thuja occidentalis L.)
Article de journal
International Biodeterioration and Biodegradation
DOI: 10.1016/j.ibiod.2013.11.006(s'ouvre dans un nouvel onglet)
Effects of cutting parameters on cutting forces and surface quality of black spruce cants
Article de journal
European Journal of Wood and Wood Products
DOI: 10.1007/s00107-013-0762-8(s'ouvre dans un nouvel onglet)
Effects of temperature and moisture content on selected wood mechanical properties involved in the chipping process
Article de journal
Wood Science and Technology
DOI: 10.1007/s00226-014-0673-9(s'ouvre dans un nouvel onglet)
Introduction
Article de journal
Canadian Journal of Forest Research
DOI: 10.1139/cjfr-2014-0015(s'ouvre dans un nouvel onglet)
Moisture sorption isotherms and thermodynamic properties of Jack pine and palm wood: Comparative study
Article de journal
Industrial Crops and Products
DOI: 10.1016/j.indcrop.2014.03.004(s'ouvre dans un nouvel onglet)
Numerical investigation on phytosanitary treatment of frozen wood using microwave energy
Article de journal
Canadian Journal of Chemical Engineering
DOI: 10.1002/cjce.22060(s'ouvre dans un nouvel onglet)
The potential of paper mill sludge for wood-plastic composites
Article de journal
Industrial Crops and Products
DOI: 10.1016/j.indcrop.2014.01.013(s'ouvre dans un nouvel onglet)
Variation of the Physical and Mechanical Properties of Hybrid Poplar Clones
Article de journal
BioResources
DOI: 10.15376/BIORES.9.1.1456-1471(s'ouvre dans un nouvel onglet)
Wood quality iufro division 5 conference, estoril, portugal, 8-13 july 2012,Qualité du bois conférence du iufro division 5, estoril, portugal, 8-13 juillet 2012
Article de journal
Canadian Journal of Forest Research
Voir les publications(s'ouvre dans un nouvel onglet)

2013

Numerical Modeling of Microwave Heating of Frozen Wood
Article de journal
Canadian Journal of Chemical Engineering
Mechanical properties of MMA-hardened hybrid poplar wood
Article de journal
Industrial Crops and Products
Effects of hot water treatment of raw bark, coupling agent, and lubricants on properties of bark/HDPE composites
Article de journal
Industrial Crops and Products
Creep behaviour of HDPE/wood particle composites
Article de journal
International Journal of Microstructure and Materials Properties
DOI: 10.1504/IJMMP.2013.055385(s'ouvre dans un nouvel onglet)
EFFECTS OF CUTTING DIRECTION, RAKE ANGLE, AND DEPTH OF CUT ON CUTTING FORCES AND SURFACE QUALITY DURING MACHINING OF BALSAM FIR
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
Effect of nanoparticles on the surface properties of natural oil-based wood flooring finishes
Article de journal
Abstracts of Papers of the American Chemical Society
Voir les publications(s'ouvre dans un nouvel onglet)
Effect of the cutting speed on the surface quality of black spruce cants produced by a chipper-canter
Article de journal
Forest Products Journal
DOI: 10.13073/FPJ-D-13-00016(s'ouvre dans un nouvel onglet)
Effects of cutting direction, rake angle, and depth of cut on cutting forces and surface quality during machining of balsam fir
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
Effects of hot water treatment of raw bark, coupling agent, and lubricants on properties of bark/HDPE composites
Article de journal
Industrial Crops and Products
DOI: 10.1016/j.indcrop.2012.05.012(s'ouvre dans un nouvel onglet)
Mechanical properties of MMA-hardened hybrid poplar wood
Article de journal
Industrial Crops and Products
DOI: 10.1016/j.indcrop.2013.02.004(s'ouvre dans un nouvel onglet)
Numerical modelling of microwave heating of frozen wood
Article de journal
Canadian Journal of Chemical Engineering
DOI: 10.1002/cjce.21826(s'ouvre dans un nouvel onglet)
Potential of pulp and paper secondary sludge as co-adhesive and formaldehyde scavenger for particleboard manufacturing
Article de journal
European Journal of Wood and Wood Products
DOI: 10.1007/s00107-013-0729-9(s'ouvre dans un nouvel onglet)
Reliability analysis of the methyl methacrylate hardened hybrid poplar wood
Article de conférence
ICCM International Conferences on Composite Materials
Voir les publications(s'ouvre dans un nouvel onglet)
Seasonal effect on the chemical composition of the leaves of Stipa tenacissima L. and implications for pulp properties
Article de journal
Industrial Crops and Products
DOI: 10.1016/j.indcrop.2012.09.023(s'ouvre dans un nouvel onglet)
The study of methyl methacrylate hardened hybrid poplar wood
Article de conférence
ICCM International Conferences on Composite Materials
Voir les publications(s'ouvre dans un nouvel onglet)
Variation of Brown Rot Decay in Eastern White Cedar (Thuja occidentalis L.)
Article de journal
BioResources
DOI: 10.15376/BIORES.8.3.4735-4755(s'ouvre dans un nouvel onglet)

2012

Surface properties of MMA-Hardened hybrid poplar wood
Article de journal
Journal of Applied Polymer Science
ANATOMICAL PROPERTIES OF SELECTED HYBRID POPLAR CLONES GROWN IN SOUTHERN QUEBEC
Article de journal
BioResources
Voir les publications(s'ouvre dans un nouvel onglet)
Anatomical properties of selected hybrid poplar clones grown in southern quebec
Article de journal
BioResources
Voir les publications(s'ouvre dans un nouvel onglet)
DENSIFICATION OF WOOD VENEERS COMBINED WITH OIL-HEAT TREATMENT. PART II: HYGROSCOPICITY AND MECHANICAL PROPERTIES
Article de journal
BioResources
Voir les publications(s'ouvre dans un nouvel onglet)
DIMENSIONAL STABILITY OF METHYL METHACRYLATE HARDENED HYBRID POPLAR WOOD
Article de journal
BioResources
Voir les publications(s'ouvre dans un nouvel onglet)
Densification of wood veneers by compression combined with heat and steam
Article de journal
European Journal of Wood and Wood Products
DOI: 10.1007/s00107-011-0524-4(s'ouvre dans un nouvel onglet)
Densification of wood veneers combined with oil-heat treatment. Part II: Hygroscopicity and mechanical properties
Article de journal
BioResources
Voir les publications(s'ouvre dans un nouvel onglet)
Fire-retardant properties of wood particleboards treated with boric acid
Article de journal
European Journal of Wood and Wood Products
DOI: 10.1007/s00107-011-0538-y(s'ouvre dans un nouvel onglet)
Mechanical and physical properties of particleboard made from two pulp and paper mill secondary sludges
Article de journal
World Journal of Engineering
DOI: 10.1260/1708-5284.9.1.31(s'ouvre dans un nouvel onglet)
Surface properties of methyl methacrylate hardened hybrid poplar wood
Article de journal
Journal of Applied Polymer Science
DOI: 10.1002/app.33799(s'ouvre dans un nouvel onglet)
THE USE OF PAPER MILL BIOTREATMENT RESIDUE AS FURNISH OR AS A BONDING AGENT IN THE MANUFACTURE OF FIBRE-BASED BOARDS
Article de journal
J-FOR-Journal of Science & Technology for Forest Products and Processes
Voir les publications(s'ouvre dans un nouvel onglet)
The use of paper mill biotreatment residue as furnish or as a bonding agent in the manufacture of fibre-based boards
Article de journal
J-FOR
Voir les publications(s'ouvre dans un nouvel onglet)
Variations in the morphological characteristics of Stipa tenacissima fiber: The case of Tunisia
Article de journal
Industrial Crops and Products
DOI: 10.1016/j.indcrop.2011.11.021(s'ouvre dans un nouvel onglet)

2011

Application of micromechanical models to tensile properties of wood-plastic composites
Article de journal
Wood Science and Technology
DOI: 10.1007/s00226-010-0351-5(s'ouvre dans un nouvel onglet)
BINDERLESS FIBERBOARD MADE FROM PRIMARY AND SECONDARY PULP AND PAPER SLUDGE
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
Binderless fiberboard made from primary and secondary pulp and paper sludge
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
DENSIFICATION OF WOOD VENEERS COMBINED WITH OIL-HEAT TREATMENT. PART I: DIMENSIONAL STABILITY
Article de journal
BioResources
Voir les publications(s'ouvre dans un nouvel onglet)
Densification of wood veneers combined with oilheat treatment. Part I: Dimensional stability
Article de journal
BioResources
Voir les publications(s'ouvre dans un nouvel onglet)
Design of Fuel Cell and Electrolyzer Emulators for Photovoltaic Applications
Article de journal
International Aegean Conference on Electrical Machines and Power Electronics & Electromotion Joint Conference
DOI: 10.1109/ACEMP.2011.6490683(s'ouvre dans un nouvel onglet)
Effects of thermo-hygro-mechanical densification on the surface characteristics of trembling aspen and hybrid poplar wood veneers
Article de journal
Applied Surface Science
DOI: 10.1016/j.apsusc.2010.11.074(s'ouvre dans un nouvel onglet)
Potential of pulp and paper sludge as a formaldehyde scavenger agent in MDF resins
Article de journal
Holzforschung
DOI: 10.1515/HF.2011.039(s'ouvre dans un nouvel onglet)
Variation in black spruce (Picea mariana (Mill.) BSP) wood quality after thinning
Article de journal
Annals of Forest Science
DOI: 10.1007/s13595-011-0127-6(s'ouvre dans un nouvel onglet)

2010

EFFECT OF CUTTING WIDTH AND CUTTING HEIGHT ON THE SURFACE QUALITY OF BLACK SPRUCE CANTS PRODUCED BY A CHIPPER-CANTER
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
EFFECTS OF COMPOSITE PROCESSING METHODS ON WOOD PARTICLE DEVELOPMENT AND LENGTH DISTRIBUTION: CONSEQUENCES ON MECHANICAL PROPERTIES OF WOOD-THERMOPLASTIC COMPOSITES
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
Effect of bark fiber content and size on the mechanical properties of bark/HDPE composites
Article de journal
Composites Part A: Applied Science and Manufacturing
DOI: 10.1016/j.compositesa.2009.06.005(s'ouvre dans un nouvel onglet)
Effect of cutting width and cutting height on the surface quality of black spruce cants produced by a chipper-canter
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
Effects of composite processing methods on wood particle development and length distribution: Consequences on mechanical properties of wood-thermoplastic composites
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
Effects of radial growth, tree age, climate, and seed origin on wood density of diverse jack pine populations
Article de journal
Trees - Structure and Function
DOI: 10.1007/s00468-009-0378-0(s'ouvre dans un nouvel onglet)
MEDIUM-DENSITY FIBERBOARD PRODUCED USING PULP AND PAPER SLUDGE FROM DIFFERENT PULPING PROCESSES
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
Medium-density fiberboard produced using pulp and paper sludge from different pulping processes
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)

2009

EFFECTS OF CAMBIAL AGE AND STEM HEIGHT ON WOOD DENSITY AND GROWTH OF JACK PINE GROWN IN BOREAL STANDS
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
Effects of cambial age and stem height on wood density and growth of jack pine grown in boreal stands
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
Effects of fiber characteristics on the physical and mechanical properties of wood plastic composites
Article de journal
Composites Part A: Applied Science and Manufacturing
DOI: 10.1016/j.compositesa.2009.06.003(s'ouvre dans un nouvel onglet)
Effects of processing method and fiber size on the structure and properties of wood-plastic composites
Article de journal
Composites Part A: Applied Science and Manufacturing
DOI: 10.1016/j.compositesa.2008.10.004(s'ouvre dans un nouvel onglet)
Engineering investigations on the potentiality of the thermoformability of HDPE charged by wood flours in the thermoforming part
Article de journal
Polymer Engineering and Science
DOI: 10.1002/pen.21394(s'ouvre dans un nouvel onglet)
Improving the fire performance of wood products
Article de conférence
International Conference on Nanotechnology for the Forest Products Industry 2009
Voir les publications(s'ouvre dans un nouvel onglet)
Wood particle/high-density polyethylene composites: thermal sensitivity and nucleating ability of wood particles
Article de journal
Journal of Applied Polymer Science
DOI: 10.1002/app.30129(s'ouvre dans un nouvel onglet)

2008

Analysis of among-species variability in wood fiber surface using DRIFTS and XPS: Effects on esterification efficiency
Article de journal
Journal of Wood Chemistry and Technology
DOI: 10.1080/02773810802485139(s'ouvre dans un nouvel onglet)
Complex dielectric properties of the sapwood of aspen, white birch, yellow birch, and sugar maple
Article de journal
Drying Technology
DOI: 10.1080/07373930801944762(s'ouvre dans un nouvel onglet)
Effect of fiber length on processing and properties of extruded wood-fiber/HDPE composites
Article de journal
Journal of Applied Polymer Science
DOI: 10.1002/app.28720(s'ouvre dans un nouvel onglet)
Effect of interannual climate variations on radial growth of jack pine provenances in Petawawa, Ontario
Article de journal
Canadian Journal of Forest Research
DOI: 10.1139/X07-178(s'ouvre dans un nouvel onglet)
Effect of the fiber size on the physicochemical and mechanical properties of composites of epoxy and date palm tree fibers
Article de journal
Macromolecular Materials and Engineering
DOI: 10.1002/mame.200800087(s'ouvre dans un nouvel onglet)
Effects of bark content and particle geometry on the physical and mechanical properties of particleboard made from black spruce and trembling aspen bark
Article de journal
Forest Products Journal
Voir les publications(s'ouvre dans un nouvel onglet)
Effects of bark content and particle geometry on the physical and mechanical properties of particleboard made from black spruce and trembling aspen bark
Article de journal
Forest Products Journal
Voir les publications(s'ouvre dans un nouvel onglet)
Effects of hot-water treatment of black spruce and trembling aspen bark raw material on the physical and mechanical properties of bark particleboard
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
Effects of hot-water treatment of black spruce and trembling aspen bark raw material on the physical and mechanical properties of bark particleboard
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
Physical and mechanical properties of particleboard made from extracted black spruce and trembling aspen bark
Article de journal
Forest Products Journal
Voir les publications(s'ouvre dans un nouvel onglet)
Physical and mechanical properties of particleboard made from extracted black spruce and trembling aspen bark
Article de journal
Forest Products Journal
Voir les publications(s'ouvre dans un nouvel onglet)
Relationship between wood porosity, wood density and methyl methacrylate impregnation rate
Article de journal
Wood Material Science and Engineering
DOI: 10.1080/17480270802607947(s'ouvre dans un nouvel onglet)

2007

Seed transfer and climate change effects on radial growth of jack pine populations in a common garden in Petawawa, Ontario, Canada
Article de journal
Forest Ecology and Management
DOI: 10.1016/j.foreco.2007.01.073(s'ouvre dans un nouvel onglet)

2005

Transition from juvenile to mature wood in black spruce (Picea mariana (Mill.) BSP)
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
Transition from juvenile to mature wood in black spruce (Picea mariana (Mill.) B.S.P.)
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)

2003

Selection for Both Growth and Wood Properties in Hybrid Poplar Clones
Article de journal
Forest Science
Voir les publications(s'ouvre dans un nouvel onglet)
Selection for both growth and wood properties in hybrid poplar clones
Article de journal
Forest Science
Voir les publications(s'ouvre dans un nouvel onglet)

2002

Defining the transition from earlywood to latewood in black spruce based on intra-ring wood density profiles from X-ray densitometry
Article de journal
Annals of Forest Science
Voir les publications(s'ouvre dans un nouvel onglet)
Defining the transition from earlywood to latewood in black spruce based on intra-ring wood density profiles from X-ray densitometry
Article de journal
Annals of Forest Science
DOI: 10.1051/FOREST:2002035(s'ouvre dans un nouvel onglet)

2000

Phenotypic correlations between juvenile-mature wood density and growth in black spruce
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
Phenotypic correlations between juvenile-mature wood density and growth in black spruce
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)

1998

Interclonal, intraclonal, and within-tree variation in fiber length of poplar hybrid clones
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
Interclonal, intraclonal, and within-tree variation in fiber length of poplar hybrid clones
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
Selected mechanical properties of fast-growing poplar hybrid clones
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
Selected mechanical properties of fast-growing poplar hybrid clones
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)
Shrinkage of fast-growing hybrid poplar clones
Article de journal
Forest Products Journal
Voir les publications(s'ouvre dans un nouvel onglet)
Shrinkage of fast-growing hybrid poplar clones
Article de journal
Forest Products Journal
Voir les publications(s'ouvre dans un nouvel onglet)

1996

Surface analysis of press dried-CTMP paper samples by electron spectroscopy for chemical analysis
Article de journal
Journal of Applied Polymer Science
DOI: 10.1002/(SICI)1097-4628(19960718)61:3<545::AID-APP18>3.0.CO;2-#(s'ouvre dans un nouvel onglet)
Surface analysis of press dried-CTMP paper samples by electron spectroscopy for chemical analysis
Article de journal
Journal of Applied Polymer Science
DOI: 10.1002/(SICI)1097-4628(19960718)61:3<545::AID-APP18>3.0.CO;2-(s'ouvre dans un nouvel onglet)

1995

MEASURE OF THE INTERNAL BOND STRENGTH OF PAPER BOARD
Article de journal
TAPPI Journal
Voir les publications(s'ouvre dans un nouvel onglet)
Measure of the internal bond strength of paper/board
Article de journal
Tappi journal
Voir les publications(s'ouvre dans un nouvel onglet)

1992

INTERCLONAL, INTRACLONAL AND WITHIN-TREE VARIATION IN WOOD DENSITY OF POLAR HYBRID CLONES
Article de journal
Wood and Fiber Science
Voir les publications(s'ouvre dans un nouvel onglet)

Postes

Professeur

Directeur

Titulaire

Responsable principal

Professeur

Lieu de travail

Lieux

Domaines d'expertise

Publications

Biomass Hydrogel for Wound Dressings: Design, Functionalization and Application

Biochemical Methane Yield and Process Performance in Thermophilic Anaerobic Digestion of Abandoned Organic Solid Wastes

Enhancing Fire Resistance and Mechanical Properties of Wood Strand Boards by Impregnation with Sodium Bicarbonate and Sodium Borate

Development and Characterization of Scented PLA-Based Biocomposites Reinforced with Spent Coffee Grounds and Lignin for FDM 3D Printing

Effect of Printing Temperature on the Microstructure and Tensile Properties of Polylactic Acid–Magnetic Iron Composites Manufactured by Material Extrusion

Upcycling Spent Coffee Grounds-Based Composite for 3D Printing: A Review of Current Research

Impact of Fiber Morphology and Content on the Thermal Stability, and Mechanical Performance of Maple Wood Fiber‐Polypropylene Composites

Performance of Oriented Strand Boards Made with Jack Pine Strands Produced by an Innovative Strander-Canter

Innovative Valorization of Wood Panel Waste into Activated Biochar for Efficient Phenol Adsorption

Performance of Oriented Strand Boards Made with Jack Pine Strands Produced by an Innovative Strander-Canter

3D‐printing continuous plant fiber/polylactic acid composites with lightweight and high strength

Metallic contaminants in wood panel production process: Evaluating press plate damage and detecting potential using IR thermography and spectroscopy

A Review of Operational Conditions of the Agroforestry Residues Biomethanization for Bioenergy Production Through Solid-State Anaerobic Digestion (SS-AD)

Variations in ring width density and tracheid morphology of tamarack wood (Larix laricina)

Suitability of 3D-Printed Cellulose-Based Polymer Materials for Electrical Insulation Applications

Evaluating the properties of deinking paper sludge from the Mediterranean area for recycling in local areas as a soil amendment and to enhance growth substrates

Effect of Wood Species on Lignin-Retaining High-Transmittance Transparent Wood Biocomposites

Sustainability, Circularity, and Innovation in Wood-based Panel Manufacturing in the 2020s: Opportunities and Challenges

Recent Advances in Bio-Based Adhesives and Formaldehyde-Free Technologies for Wood-Based Panel Manufacturing

Optimizing the Dielectric and Mechanical Performance of 3D-Printed Cellulose-Based Biocomposites and Bionanocomposites through Factorial Design for Electrical Insulation Application

Characterization of Posidonia oceanica Fibers High-Density Polyethylene Composites: Reinforcing Potential and Effect of Coupling Agent

Investigation of Thermomechanical and Dielectric Properties of PLA-CA 3D-Printed Biobased Materials

Visible Light-Induced Photocatalytic Degradation of Methylene Blue Using Copper-Doped Carbon Dots One-Step Derived from CCA-Wood

A paradigm shift towards production of sustainable bioenergy and advanced products from <i>Cannabis</i>/hemp biomass in Canada

How Do 3D Printing Parameters Affect the Dielectric and Mechanical Performance of Polylactic Acid–Cellulose Acetate Polymer Blends?

The Role Played by the Rake Angle of a Strander-Canter When Processing Jack Pine Logs

A Comparative Study on Heavy Metal Removal from CCA-Treated Wood Waste by Yarrowia lipolytica: Effects of Metal Stress

Chemical Elements Content and Distributions within Different Tissue Types of White Spruce

Analysis of the interaction between internal porosity and oriented strand board performance using X-ray computed tomography

Activities of cellulose acetate and microcrystalline cellulose on the thermal and morphomechanical performances of a biobased hybrid composite made polybutylene succinate

Advances in Modified Wood-Based Adsorbents for Contaminant Removal: Valorization Methods, Modification Mechanisms, and Environmental Applications

Dielectric and rheological performances of cellulose acetate, polylactic acid and polyhydroxybutyrate-co-valerate biobased blends

Effects of Wood Species on the Energy Requirements and Size Distribution of Strands Produced by a Strander- Canter

Copper-Doped Carbon Nanodots with Superior Photocatalysis, Directly Obtained from Chromium-Copper-Arsenic-Treated Wood Waste

Regional, Site, and Tree Variations of Wood Density and Growth in Thuja occidentalis L. in the Quebec Forest

Influence of Four Spacings between Trees and Four Samplings Heights on Selected Wood Quality Attributes of White Spruce (Picea glauca (Moench) Voss)

Fire Behavior and Failure Model of Multilayered Wood Flour/HDPE/Polycarbonate Composites with a Sandwich Structure

Pyrolysis of Chromated Copper Arsenate-Treated Wood: Investigation of Temperature, Granulometry, Biochar Yield, and Metal Pathways

Synthesis and Characterization of Wood Rigid Polyurethane Composites

Physical and Mechanical Properties of Oriented Strand Board Made from Eastern Canadian Softwood Species

Comparison between static modulus of elasticity, non-destructive testing moduli of elasticity and stress-wave speed in white spruce and lodgepole pine wood

Effects of Strands Geometry on the Physical and Mechanical Properties of Oriented Strand Boards (OSBs) Made from Black Spruce and Trembling Aspen

The emerging development of transparent wood: materials, characteristics, and applications

Towards Strand Production in Primary Log Breakdown: Effects of the Counter-Knife and Temperature on Size Distribution of Jack Pine Strands

Variation of White Spruce Carbon Content with Age, Height, Social Classes and Silvicultural Management

Xerogel-like Materials from Sustainable Sources: Properties and Electrochemical Performances

Dielectric properties and thermal stability of cellulose high-density polyethylene bio-based composites

Effect of Pyrolysis Temperature and Wood Species on the Properties of Biochar Pellets

Flammability, thermal stability, and mechanical properties of wood flour/polycarbonate/polyethylene bio-based composites

Effects of Chromic Treatment on the Surface Properties of Polypropylene (PP) Wood Composites

Mitigation of CO2, CH4 and N2O from Acidic Clayey Soil Amended with Fertilizer Pellets Based on Alkaline Organic Residues

Fire Retardancy, Water Absorption, and Viscoelasticity of Borated Wood—Polycarbonate Biocomposites

Effects of Coating on the Dimensional Stability of Wood-Polymer Composites

Dielectric Properties of Wood-Polymer Composites: Effects of Frequency, Fiber Nature, Proportion, and Chemical Composition

Short-Term Effects of Biosolid Application on Two Mediterranean Agricultural Soils and Durum Wheat Yield

Investigation of sustainable porous carbon as radar absorbing material

CO2 Emission and Change in the Fertility Parameters of a Calcareous Soil Following Annual Applications of Deinking Paper Sludge (The Case of Tunisia)

Effect of the Pyro-Gasification Temperature of Wood on the Physical and Mechanical Properties of Biochar-Polymer Biocomposites

3D finite element enthalpy method for analysis of phytosanitary treatment of wood by microwave

Conversion of lignocellulose into biochar and furfural through boron complexation and esterification reactions

Dielectric characterization of white birch-activated biochar composites: A sustainable alternative to radar-absorbing materials

Efficiency of eight modified materials for As(V) removal from synthetic and real mine effluents

High-performance lignocellulose/polycarbonate biocomposites fabricated by in situ reaction: Structure and properties

Improving lignocellulose thermal stability by chemical modification with boric acid for incorporating into polyamide

Microbial remediation for the removal of inorganic contaminants from treated wood: Recent trends and challenges

Production of Bio-based Polyol from Oxypropylated Pyrolytic Lignin for Rigid Polyurethane Foam Application

The conversion of wood residues, using pilot-scale technologies, into porous activated biochars for supercapacitors

Reinforcement of continuous fibers for extruded wood-flour/HDPE composites: Effects of fiber type and amount

Effect of Forest Biomass Pretreatment on Essential Oil Yield and Properties

Influence of Stem Taper on the Yield of Black Spruce Stands and Trees Following Commercial Thinning